SV650.org - SV650 & Gladius 650 Forum
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Wonky Exhaust! (http://forums.sv650.org/showthread.php?t=80438)

Stu 13-11-06 03:33 PM
[quote="TSM"]
Quote:
Originally Posted by Stu
The engine, frame, exhaust & rear sub frame are still all in the same place in relation to each other, even the swingarm is, just the extended angle is diffrent to norm.
I was thinking the frame (where the exhaust starts out) and the rear sub frame (where it attaches to the pillion peg) changed angle.

But it's just the swing arm in relation to the rear sub frame that changes?

Ah OK 8)

Bear 13-11-06 03:54 PM
Quote:
Originally Posted by Viney
You got any photos?

Fraid not! No digital camera malarkey!
Sticking out to the side (as you look at the back of the bike) Yes!
Sticking up in the air (as you look at the side of the bike)
Too long (Extending past the rear wheel too much)

??
I've called Quill and they say there's a small chance they have sent me the wrong link pipe. they're gonna send me a different one to try, so wish me luck!

Viney 13-11-06 04:09 PM
Quote:
Originally Posted by Pigbunk
Quote:
Originally Posted by Viney
You got any photos?

Fraid not! No digital camera malarkey!
Sticking out to the side (as you look at the back of the bike) Yes!
Sticking up in the air (as you look at the side of the bike)
Too long (Extending past the rear wheel too much)

??
I've called Quill and they say there's a small chance they have sent me the wrong link pipe. they're gonna send me a different one to try, so wish me luck!
Luck sent, but its definitly the link pipe. It took me ages to line mine up when i had a blu flame, but got there in the end

carlos 13-11-06 06:47 PM
Quote:
Originally Posted by TSM
Yep there are two diffrent link pipes for the pointy SVs, one will make it stick out too much the other will be ok. I beleave that it was Blue Flame that someone was having a hell of a time telling them that the link pipes were diffrent.
I think this may be the one you are on about TSM :shock:

Click here

BILLY 13-11-06 06:59 PM
Did you get any spacers to space the pillion hanger out? With the spacers behind the hanger you can twist the link pipe around more!!!!

Bear 13-11-06 08:37 PM
Quote:
Originally Posted by BILLY
Did you get any spacers to space the pillion hanger out? With the spacers behind the hanger you can twist the link pipe around more!!!!
But that'd just make it stick out even more at the back, surely?

Bear 13-11-06 09:06 PM
Ok, forgive the fact that it's dark outside...

http://upload4.postimage.org/1644755/DSCN0401.jpg


http://upload4.postimage.org/1644764/DSCN0403.jpg

Maybe I'll try that again in the morning...
:oops:

You can probably see that it looks a bit grenade launcher-y!

valleyboy 13-11-06 09:13 PM
Try putting the exhaust on the hanger the otherside of the bracket.. that will bring it back a lot...

actualy, I would say that is your problem right there.... the exhaust bracket is on the wrong side of the footpeg.. you want it on the back end of the peg, and not the front...

Bear 13-11-06 09:17 PM
No go. Because the exhaust sticks out so much, I can only mount it on the outside of the hanger. I'm gonna have to put up with it for a while, as I have no link piupe to re-mount the original.

Poo!

valleyboy 13-11-06 09:19 PM
It should go on like this...

http://i97.photobucket.com/albums/l2...oy2k/zorst.jpg


All times are GMT. The time now is 08:53 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.