Re: Where`s My Horn???
Quote:
Originally Posted by laMon
(Post 1392148)
how difficult are they to fit? I think i want one:p. is it just the old one off the new one on?
|
On the FZ6 it's really awkward because there's nowhere up front to mount the whole heavy horn/compressor as a unit, so I split the heavy compressor from the featherweight horn and modified them both to accept a link pipe that ran from behind the engine (where I'd sited the compressor) to inside the fairing where I hung the horn off the inner fairing brackets. The wiring was a doddle with the relay sitting on top of the battery right up under the front of the fuel tank. I used heat-shrink on all the cabling and proper Lucar connectors with rubberised shrouds to make it look as factory fitted as possible. The link pipe was a long bit of black rubber vacuum hose I got from the local car parts shop - that doesn't look out of place on the bike either.
I haven't had a good look at an SV to see if it can be mounted in one piece inside the fairing, but I'll let you know tomorrow. |
