![]() |
Re: Architects costs
Quote:
|
Re: Architects costs
Quote:
|
Re: Architects costs
Im a Civil Engineer and deal with buildings all the time, but house building is specialised. I had an extension and bits done to my house a few years ago and while I think I am quite capable of doing the plans I wanted it to run smoothly, so I hired someone who does it week in week out. If you know amyone who has had work done speak tot he and who they used. You can also speak to your Planning Authority and they should have a list of people that they regularly deal with and could give you.
Trust me, you only want to go through planning and building inspections once. making mistakes at these stages will turn your project into a money pit. |
Re: Architects costs
Quote:
|
Re: Architects costs
I agree with leedsmatt to a certain extent, i only use them on a smaller scale but i will give my opinion anyway.
Example from the kitchen extension i have just finished... 1, Plans said for a flush ceiling in regards to steel spanning the whole width of kitchen and then another perpendicular to that so effectively taking corner of house out, the architect (and yes he was a proper one) specified these as a 10" x 6" I beam and a smaller one on the inside (cant remember what size that was), now with 6x2 ceiling joists and no way of dropping ceiling, where is excess of beam supposed to go, upwards obviously, but he never went up stairs to see the bathroom directly above which was fully tiled and fitted with furniture and client didnt want to pay for all that to be done again. Also, with the low pitch, the beam would, i think, have projected out of the roof tiles ??? So, i went to my structual engineer who laughed first, then just said (with calcs to back this up)just use 8" x 8" I beam and thats more than enough. We still had to put a bulkhead in to enclose beams but client was fine with that as they hadnt asked for flush ceiling anyway??? 2. He had drawn the plans showing the exterior walls right on the border of the adjoining property, so if you know anything about these things you know thats not possible. It had a party wall act on it so party wall had to stay, with guttering and fascia board you need to come from border centre line around 6-7", even the neighbour involved noticed this, the architect didnt. Im not having a go at all architects, i have seen some top work from them, but as leedsmatt said, sometimes they design stuff that cant be built. Phil |
Re: Architects costs
Architects aren't ****s it's just hard to find a good one, and like has been said there's a lot of 'technicians' pretending to be architects.
Always go by a fixed price if possible or like tazdaz said pay at milestones. |
Re: Architects costs
I'm well aware of the friction that can exist between architects and engineers, I used to paddle with my architect friend mentioned and a civil (but not always) engineer who specialised in building work. Many of the boring flat bits of river were enlivened by **** taking on both sides about who makes a building work.
Matt, you are the one who took those comments to heart. All I said is I do not agree with the sweeping generalisations made in the thread. As this thread is about architects fees, I wanted to provide some balance to the view that architects live in cloud cuckoo land and charge exorbitant fees. IME they are actually bright, interesting and creative people and the ones I know are rooted in the real world. |
Re: Architects costs
Quote:
Almost all of them are nice people though, even if on the whole they are creative rather than technical Only problem is they insist on using millimetres, I mean, come on... measuring a building in millimetres is like giving recipe ingredients in milligrams](*,);) Oh, and rpwoodman, if you''re still around in this thread now it's descended into chaos, give me a shout if you need a topographical survey carried out, I'm sure I can do you a decent price;) |
Re: Architects costs
Fair enough "calm down" was a **** poor choice of wording, it was a micheal winner calm down in my head but on forum its open to be read word for word. I appolgise mate I would have put a "lol" after your quote cos I liked how you used the phrase bad people but felt starting with a "lol" would seem condesending, as it happened my 2nd choice of wording was equally misinterprited anyway no harm done :)
I wouldnt have even posted the above had arty not stated she took offence, it was that which made me feel an explantion of my previous post was required. Again no harm - no foul. |
Re: Architects costs
Quote:
|
All times are GMT. The time now is 08:16 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.