Re: R6 throttle tube, is this the part number?
 

Think i might have to give this a go as well next month when i have time, I had the same issue when taking my barends off to give them a paint as mav said drill them out then a pair of mole grips did the job for me

Re: R6 throttle tube, is this the part number?
 

but, can any of you help with this query?

http://forums.sv650.org/showthread.php?t=166125

;);););):D

Re: R6 throttle tube, is this the part number?
 

Just replied

Re: R6 throttle tube, is this the part number?
 

sorry mate i took mine to my local diy place and said can i have something the same size as this. The only thing he had was slightly too long so i chopped a bit of and fitted it.

Re: R6 throttle tube, is this the part number?
 

;)

Re: R6 throttle tube, is this the part number?
 

A good tip to remove bar end screw (curvy model) is to wrap a protector around the bar end (I use a thick piece of leather - old belt) and use a pair of mole grips or gland pliers at the same time as screwdriver, turning both in the anticlockwise direction.

Re: R6 throttle tube, is this the part number?
 

Didn't work for me and ended up drilling the head off, would have saved a lot of time if I'd done this straight away :neutral:

Re: R6 throttle tube, is this the part number?
 

might be worth a go before the screw head is too mullered, if it isnt already :(

Thanks for the tip ;)

Re: R6 throttle tube, is this the part number?
 

i got some new bar ends ,ready to do the mod .but the mini flip front is net on my list.

Re: R6 throttle tube, is this the part number?
 

So looking at the canyon chaser site is it not worth doing to a 650 s pointy? I am concerned as have done it to mine a few months ago and all seems to be ok...but a little bit dubious now!!!:(:(