SV650.org - SV650 & Gladius 650 Forum
Page 4 of 6 123 4 56
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   New SV on the Block with some questions. (http://forums.sv650.org/showthread.php?t=118329)

Geoffrey 01-10-08 02:09 PM
Re: New SV on the Block with some questions.
 
Thay are good, I have a Fabbri on my SK4 and it makes a lot of difference for me.

thor 01-10-08 02:56 PM
Re: New SV on the Block with some questions.
 
Doesn't quite fit though. There is a gap between the fairing and the inside of the screen. It's because the OEM one is thicker at the top, but it's not too bad.

Stu 01-10-08 02:59 PM
Re: New SV on the Block with some questions.
 
Quote:
Originally Posted by Stretch650 (Post 1640406)
PS: anyone gonna be round newlands corner way this weekend ??
I Could possibly make the effort :)

Quote:
Originally Posted by thor (Post 1640521)
Doesn't quite fit though. There is a gap between the fairing and the inside of the screen. It's because the OEM one is thicker at the top, but it's not too bad.
You can dremmel/file the offending bit to get it to fit though. I haven't but some people have

Stretch650 01-10-08 07:29 PM
Re: New SV on the Block with some questions.
 
[quote=Stu;1640527]I Could possibly make the effort :)

Cool - not sure how it all works as i have not been up there before on a bike. I normally mountain bike through there and always see the bikes. I am heading down to Cranleigh in the morning and the over to Newlands Corner for about lunch time to see whats going on ! Look out for me - i will have the helmet in my avatar on !

Stretch650 01-10-08 07:30 PM
Re: New SV on the Block with some questions.
 
Quote:
Originally Posted by thor (Post 1640521)
Doesn't quite fit though. There is a gap between the fairing and the inside of the screen. It's because the OEM one is thicker at the top, but it's not too bad.
Is it noticible or can you only really see it if you are looking for it! Are all aftermarket screens like this ??

Stretch650 01-10-08 07:38 PM
Re: New SV on the Block with some questions.
 
One more thing !!!

Untill i get my Akrapovic/Yoshi system i am thinking of trying to get a bit more burble out of my CCC can. The baffle is currently rivited in and I am not sure if this means that it should not be removed. Is it ok to drill the rivet out and remove the baffle?

What is the best addition to this ? Better air filter - if so which one K&N ??

Dangerous Dave 01-10-08 07:51 PM
Re: New SV on the Block with some questions.
 
To meet the law the removable baffle must be either riveted or spot welded into position. If it has one rivet at the bottom on the outlet cap then all you need to do is drill out the rivet and remove the baffle.

Stu 01-10-08 10:36 PM
Re: New SV on the Block with some questions.
 
[quote=Stretch650;1640862]
Quote:
Originally Posted by Stu (Post 1640527)
I Could possibly make the effort :)

Cool - not sure how it all works as i have not been up there before on a bike. I normally mountain bike through there and always see the bikes. I am heading down to Cranleigh in the morning and the over to Newlands Corner for about lunch time to see whats going on ! Look out for me - i will have the helmet in my avatar on !
Saturday or sunday? prob not available Saturday

Stretch650 02-10-08 08:10 AM
Re: New SV on the Block with some questions.
 
Quote:
Originally Posted by Dangerous Dave (Post 1640888)
To meet the law the removable baffle must be either riveted or spot welded into position. If it has one rivet at the bottom on the outlet cap then all you need to do is drill out the rivet and remove the baffle.

Hi DD - I got up early this morning and out with the drill to remove the rivet which was not really a problem! Thing is the baffle is still completely stuck in. I tried to gently ease it out with pliers but no go. I then rode to work to see if it would loosen it but no change - Am I missing something ???

ChrisCaveman 02-10-08 09:05 AM
Re: New SV on the Block with some questions.
 
Just a quick thread hi-jack!

Where can you get a Poly26 Belly pan from? I've used teh google, but can't find anything! =)


All times are GMT. The time now is 03:22 AM.
Page 4 of 6 123 4 56
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.