SV650.org - SV650 & Gladius 650 Forum - Renthal Bar 998cc.com Conversion

Page 4 of 5

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Renthal Bar 998cc.com Conversion (http://forums.sv650.org/showthread.php?t=154237)

Matts-Yokes

07-07-10 03:47 PM

Re: Renthal Bar 998cc.com Conversion

Clutch cable is not required and we have never had any issues with them!

madness

07-07-10 04:09 PM

Re: Renthal Bar 998cc.com Conversion

Perhaps I have mine routed incorrectly.

Can anyone supply pictures of the routing?

danf1234

07-07-10 05:07 PM

Re: Renthal Bar 998cc.com Conversion

I would be interested to know how to route the clutch cable as well.

Specialone

07-07-10 05:16 PM

Re: Renthal Bar 998cc.com Conversion

All i did was when you take the clip on off, you'll notice it goes through the forks and round to the lever, all i did was take it straight to the lever and not round fork leg, worked fine for me.

DarrenSV650S

07-07-10 05:24 PM

Re: Renthal Bar 998cc.com Conversion

Take it there's no chance of the cable getting squished on full lock with it re-routed like that?
And did you do the same with the switchgear wiring?

danf1234

07-07-10 05:50 PM

Re: Renthal Bar 998cc.com Conversion

Quote:

Originally Posted by DarrenSV650S (Post 2313808)

Take it there's no chance of the cable getting squished on full lock with it re-routed like that?
And did you do the same with the switchgear wiring?

If you look carefully at the pictures on the website that is how they have done it on the the bike in the picture.

danf1234

07-07-10 05:53 PM

Re: Renthal Bar 998cc.com Conversion

Do the bars come with the little hole drilled to locate the switch gear on?

Specialone

07-07-10 05:58 PM

Re: Renthal Bar 998cc.com Conversion

Quote:

Originally Posted by danf1234 (Post 2313816)

Do the bars come with the little hole drilled to locate the switch gear on?

No they need drilling, you also have to remount the brake fluid reservoir.
I used the standard bracket / bolt and drilled and tapped the bars.

danf1234

07-07-10 06:31 PM

Re: Renthal Bar 998cc.com Conversion

Well after a proper **** day, I am having to cancel my order for the riser kit. I t will have to wait for another (better) day. MY money priorites have just rapidly changed.

Specialone

07-07-10 06:33 PM

Re: Renthal Bar 998cc.com Conversion

Quote:

Originally Posted by danf1234 (Post 2313835)

Well after a proper **** day, I am having to cancel my order for the riser kit. I t will have to wait for another (better) day. MY money priorites have just rapidly changed.

Bugger :(

All times are GMT. The time now is 05:07 PM.

Page 4 of 5

Show 40 post(s) from this thread on one page