![]() |
Re: What have you tinkered with today?
i put dibs on the front wheel.
|
Re: What have you tinkered with today?
Received a bag of shiny engine bolts from Mr Chewy, beautifully sorted and documented. Gathered all my tools and went outside. Picked up Bolt #1 from Bag A and didn't have the right socket available. Became distracted by the thought of cold beer in the fridge, which summarily ended all maintenance for the day.
|
Re: What have you tinkered with today?
Checked the valve clearances. All four exhaust valves out of spec.
New shims and CCT gaskets ordered. |
What have you tinkered with today?
Quote:
Weird when they weren't done that long ago. How bad were they? Is it running better now? |
Re: What have you tinkered with today?
Lance can you post a pic of the Abba adaptors you have.
|
Re: What have you tinkered with today?
Quote:
They were checked 10k miles ago so it's quite possible they've moved since then. I didn't get to the bottom of the running issue so getting into it far enough to adjust the valve clearances gives me a chance to check everything out. |
Re: What have you tinkered with today?
Drilled out the we bolt holding the baffle in my 'new to me' can for the gixxer.
Re'tapped the hole and fitted new stainless M5 cap. Ready for fitting after work tonight. Will never sound as good as the SV but better than OE exhaust. |
Re: What have you tinkered with today?
Drilled out the bolts that hold the front mudguard on my spare set of forks.
|
Re: What have you tinkered with today?
Got my Daytona 600 back from its valve shim service. All were in spec so didn't need any further work.missed my beastie this past week.
|
Re: What have you tinkered with today?
1 Attachment(s)
I tinkered with my cousins new big ol girl. Sadly this is the only picture I took of his new R1 track bike. Thankfully he's gonna get rid of the Orange parts. See AndySmith I told you my family don't do orange.
|
Re: What have you tinkered with today?
You are all ginger as I've Suspected
|
Re: What have you tinkered with today?
Quote:
|
Re: What have you tinkered with today?
Quote:
|
Re: What have you tinkered with today?
Quote:
|
Re: What have you tinkered with today?
Quote:
Quote:
Scary part about today is my cousin is now determined to get me out on track on this crazy bonkers tuned R1 that he's just acquired, as he said he wants to see me s*** a brick as the front lifts in 5th under the bridge at Knockhill just when your mind is saying its time to hit the brakes. It'll all end in tears, either laughter or pain and more than likely both. |
Re: What have you tinkered with today?
Quote:
Probably wouldn't have bothered anyway. Since they sent me out on a bike with no brakes I haven't been in so much. Tinkering for today was cleaning the curvy. I had to wait in for a phone call (I know, how quaint). So with nothing better to do, I washed the bike, clay barred the paint, washed the bike again, polished the paint, chrome and bare alloy bits, then waxed it all. |
Re: What have you tinkered with today?
feeeeed me NOW!!! yes I added teeth to the Daytona...................................... then took them off again after the pic, lol
http://i97.photobucket.com/albums/l2...psuv5r0n2i.jpg |
Re: What have you tinkered with today?
Popped the baffle in the Daytona for my Observed Ride.
PCut a gamy bit of loom out of the zx6r's loom and fitted a DTRL to give the charging system an easier time . |
Re: What have you tinkered with today?
Quote:
|
Re: What have you tinkered with today?
|
Re: What have you tinkered with today?
Had the carbs off the EN500 to get it sorted. One stuck float needle, and as usual both float bowl o rings are perished. New ones on the way. Once it's done, the Mrs is doing her DAS. Probably next month.
|
Re: What have you tinkered with today?
Modified my airbox on the sv650 k5 that I am rebuilding slowly. Did the TPS mod. Got more parts coming this week. I know what I want it to look like and it is getting there. Slowly.
|
Re: What have you tinkered with today?
New seals in one rear caliper & reassembled.
The other spare caliper joining bolts refuse to budge, so Plusgaz treatment for them :smt072:smt072 |
Re: What have you tinkered with today?
Quote:
|
Re: What have you tinkered with today?
Caliper refitted & brake bled. A happier caliper now :-)
|
Re: What have you tinkered with today?
Today I have fitted a new screen, fitted a new hugger as the old one was about to fall off and fitted a 12v lead into the top box.
|
Re: What have you tinkered with today?
Fixed water leak and wiring issue on the VF1000. All ready to go :)
|
Re: What have you tinkered with today?
I started a ten week motorcycle maintenance evening course last night at Hackney College with CMSD2. I'm basically clueless and fed up with paying the BMW dealer to do everything so when he suggested it I thought it was a good idea.
Ideally I would take my own bike along each week but the ride from Chelmsford to Lord's then back to Hackney then home will probably be a bit much in the middle of November after a long day at work so instead I'm planning on taking Chris's Tiger to bits each week, and if he's very lucky I might put it back together again. :-D |
Re: What have you tinkered with today?
After visiting mum at the hospital and ridding home in the dark. A H4 night breaker in the zx6r's headlight
|
Re: Re: What have you tinkered with today?
Quote:
sent via Pony Express |
Re: What have you tinkered with today?
This afternoons plan is to 'hopefully' find my handle bars aren't bent at all....... with a bit of jiggery pokery magickery and some front fork bouncing. :smt120
See, as stock, most MOT centres would fail the bike on it trapping your thumbs on the tank straight out of the factory. my MOT place knows this is normal. Currently, one side is banging on the tank, but is still aligned with the markings I drew on them last time I adjusted all the levers and bars for my comfort. They only look bent in the right bent shaped way. Who rides with their thumbs trapped to the tank anyway!!!?? We shall see, fingers crossed, my gut feeling is right :smt045 That will be the first job of getting her back on the road post accident. |
Re: What have you tinkered with today?
You always forget about the lack of gap until you do a U turn and bang your digit. It's even worse if you get into a tank slapper.
sent via Pony Express |
Re: What have you tinkered with today?
Ah trapped thumbs.
that's why i dropped the daytona doing a u turn. Well that's my story and I'm sticking to it :s |
Re: What have you tinkered with today?
My bars are like cow horns, great big flat bars.
U turns..... wots them? :lol: |
Re: What have you tinkered with today?
Yea u turns are like wheelies, Stoppies and knee downs.
Optional. But rospa test I've got to do figure 8 and a U ie. . Holding the front brake on and doughnut is apparently not accepted |
Re: What have you tinkered with today?
Mines a naked. No chance of trapping thumbs on that.
|
Re: What have you tinkered with today?
Put up a baton in my mums shed to hang her garden tools from
|
Re: What have you tinkered with today?
I bought some bling, I stopped short of buying some new end cans to match!
Bling purely for protection, and in my usual motorcycle fashion its very, very shiny :D |
Re: What have you tinkered with today?
Quote:
|
Re: What have you tinkered with today?
Quote:
The problem I have is... My Leo Vince pipes are damaged the link pipes are not.. I have looked for some replacement Leos. That's not so simple. They don't exist for this bike. They sound like they are raising hell Anything else, will just sound muted :smt088 |
All times are GMT. The time now is 09:47 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.