Re: Which forks are interchangable with a curvy?
 

Thanks matey. I think that's just about everything. I'm not sure of which calipers to get though. Is it only the GSXR SRAD calipers that will fit or are there other options?

Re: Which forks are interchangable with a curvy?
 

Top bearing from zoran at TWF
(i heard some other con arteest is making them elsewhere too, badly. i would only buy from TWF)

You need SRAD 600 or TL1000S calipers

Re: Which forks are interchangable with a curvy?
 

Depends how much you want to spend.
Brembo do some that would fit, But im guessing that the standard SRAD brakes are going to be a big improvement on the SV brakes any ways.

Re: Which forks are interchangable with a curvy?
 

Not that much! :eek: lol.

Ideally I would like those but I just can't justify spending that much as my bike's not worth too much really! And as you say the GSXR calipers should be a considerable improvement over my existing brakes.

Once I've got all the bits and doing it all I've then got the speedo pick up sensor to worry about. How do most people get their speedo working after a front end swap? I think I'm going to need an hand with all this! ha. :D

Re: Which forks are interchangable with a curvy?
 

If you decided you wanted to use Renthals or normal bars instead of clip-ons you could use these

Re: Which forks are interchangable with a curvy?
 

You can also use calipers from any of the older gixxers, bandit 1200s, busas, TLRs, SRAD750s, loads of kwackers.

Basically any tokico or nissin in that "triangle" shape will have 90mm hole centers and the right offset.


Those brembos you link are the 40mm mounting hole centre ones and they won't fit without adaptor plates.
(anything from 1988(ish) up to 2000 had 90mm centres, anything since then but not radial got 67mm or something, since then it's been radial and mounting holes pointing the wrong way)