Bearing question for Curvy
 

Hi all,

I have a GSXR600 K1 front end coming for my Curvy SV650 Trackbike. I know you need to fit a special head bearing and did a search but after 28 pages I gave up.

Can someone tell me what bearing I need to buy and where to get it from, I'm gonna fit the front end during Xmas break?

Thanks

HHH

Re: Bearing question for Curvy
 

Bottom bearing is same as any GSXR or SV

For top you need to fit special bearing from twin works factory
http://www.twfracing.com/images/zpar...earing_lg.jpeg

Re: Bearing question for Curvy
 

Re: Bearing question for Curvy
 

50USD delivered to the UK

Druid

Re: Bearing question for Curvy
 

Pay attention to thread posted by zadar. Good pics and info there.

Re: Bearing question for Curvy
 

Damn I aint getting that in time for Xmas, does no one in the UK stock it?

Or does anyone have the measurements for the bearing as it may be an off the shelf item?

Re: Bearing question for Curvy
 

http://forums.sv650.org/showthread.php?t=128319

You will be very lucky. Bearing you buy from TWF is a larger one machined down. HR32906 is apparently same but rare.

Re: Bearing question for Curvy
 

There is a bearing place round the corner from me I'll ask in the morning, if its a no go I'll order from TWF in the afternoon and cross my fingers

Re: Bearing question for Curvy
 

Just had a thought why cant I use the SV stem with the GSXR yokes?

Re: Bearing question for Curvy
 

No reason why not. You'll need to make a spacer for the top though. I would use GSXR stem just because it is easy.