side stand advice curvey
 

heya.

how much is a new side stand plate for a curvey? mine is quite worn and there is a lot of play in it which means tht then i flick it up it the stand springs catch my belly pan.

Ive already spaced the stand out, and tried straighting the stand its defo the hole in the plate which attches to the bike which is worn.

sorry its a bit confusing if any one can help great if not ill try gain but with pictures.

cheers guys.

Re: side stand advice curvey
 

IIRC

there is 2 bolts, holding it on?

have you tried tightening them?

(i may be wrong)

Re: side stand advice curvey
 

yea there is two bolts holding it on, they were tight and ive spaced tht plate with the two bolts out about quarter inch. it stopped hitting but it was only a matter of time before the fork park of the stand splayed out gain because the hole in the plate has gone oval with wear over the years.

i think the only remedy is to change the plate. :confused:

Re: side stand advice curvey
 

Have a search on Ebay, is it the plate or the stand you want?

To go new look for the part number here, and purchase it from here.

Re: side stand advice curvey
 

scott let me know what part bit you need and i'll get you it sent down -just pay the postage and its yours mate

husky

Re: side stand advice curvey
 

heya guys its the plate im after the hole in mine has gone oval. :D

Re: side stand advice curvey
 

Going by the information supplied by Dangerous Dave the part number is 42330-19F01 and costs £61.80 new from Suzuki.

As he also suggested, try Ebay.

Re: side stand advice curvey
 

http://cgi.ebay.co.uk/SUZUKI-SV-650-...d=p3286.c0.m14

http://cgi.ebay.co.uk/NEW-SUZUKI-SID...d=p3286.c0.m14

http://cgi.ebay.co.uk/Suzuki-SV650-S...d=p3286.c0.m14

http://cgi.ebay.co.uk/SUZUKI-SV650-S...d=p3286.c0.m14

http://cgi.ebay.co.uk/Suzuki-SV650-2...d=p3286.c0.m14

Re: side stand advice curvey
 

http://i176.photobucket.com/albums/w...hadd/stand.jpg

that do you scotty-if so just postage mate

husky

Re: side stand advice curvey
 

normaly its the single bolt that wears out and becomes sawtoothed, i changed mine worrying that one day it would snap.

Re: side stand advice curvey
 

do you think changing the plate will fix my problem. the bolt and fork on the stand seem to be fine although i did close the gap in the fork part of the stand which did solve my prblem but today its catching again whihc makes me think tht the bolt maybe gone to. think ill just try one at a time .


thanks for all the help guys. huskey ive pmd you.

Re: side stand advice curvey
 

If the fault is with the plate only then the stand it self should be good and reusable.

Re: side stand advice curvey
 

remember that even a 1mm wear in the bolt will work out as a large movement, but if you say that the hole is properly oval then its prooly a good start there, GSXR side stand plates will fit SV curvies

Re: side stand advice curvey
 

£61.80! Ouch.

Welder.