K3 wiring diagram
 

Anyone got one? Cheers.

Re: K3 wiring diagram
 

http://bolty.net/wp-content/uploads/...lor_wiring.jpg

try this one Si

Re: K3 wiring diagram
 

Can send you full size ones if you want

http://i88.photobucket.com/albums/k1...DSCF0009-2.jpg

http://i88.photobucket.com/albums/k1...DSCF0008-6.jpg

Re: K3 wiring diagram
 

Thanks I have that one but there seems to be an error on it. The clock I have has a red wire coming from it. There are no red wires shown on that diagram coming from the clocks.

Re: K3 wiring diagram
 

Cool I will PM you.

Re: K3 wiring diagram
 

I am confused still.

I have a red wire coming out of the clocks but there isn't one shown in the diagram. There are other differences as well. Yellow black I dont have but I do have a Black Yellow.

I also have a red black wire but again this is not shown in the wiring diagram.

Could someone check different versions of the wiring diagram and see if those ones have the colours I have?

Thanks.

Re: K3 wiring diagram
 

they appear in the k1 and k2 i think scanning them now and you can have a look

Re: K3 wiring diagram
 

Curvy clocks have what you describe

Re: K3 wiring diagram
 

Quite a bit got changed around when fitting your new instruments, I seem to remember arranging some extra connections to your new instruments as they need a permanent live to keep the clock alive, it's possible that the red you can't identify is that one.

What's amiss?

Re: K3 wiring diagram
 

http://i166.photobucket.com/albums/u...iring10001.jpg

http://i166.photobucket.com/albums/u...iring10002.jpg

can give you bigger ones i think if needed mate and can get the curvy diagrams for you hth

hang on there tiny bigger ones on way

Re: K3 wiring diagram
 

http://i166.photobucket.com/albums/u...ing10001-1.jpg
http://i166.photobucket.com/albums/u...ing10002-1.jpg
http://i166.photobucket.com/albums/u...iring10003.jpg
http://i166.photobucket.com/albums/u...iring10004.jpg

hope this helps can get better scans if needed

Re: K3 wiring diagram
 

I changed out the main loom for another and in the process had to strip the connector blocks. All the connections are now in the headlight bowl by way of soldered joints.

I thought I followed my own previous instructions correctly but started having issues. The first was that the fuel light would not work. The clock resets after the ignition is switched off. A couple of days ago, I lost all clock function and the bike died. The electrics came back on to the clocks but the battery was dead. I had to bump start the bike. Unless the battery is fully charged all the time, I do not have enough power to turn over the engine. I assume I have wires crossed somewhere. For me it would have been a simple case of tracing the clock wires on the pointy wiring diagram and relating them to the same wires on the curvy and splice them together.

Oh and when I put the brakes on the side light bulb glows dimly.

Trouble is, the wiring colours shown coming from the pointy clock is not the same colour wires as I expected to see. I can only think that the wiring loom that plugs into the clock must have come from a different clock. Hence the question about different versions of the wiring diagram for the pointys.

I thought it was going to be easy, I should have known better. :roll:

Re: K3 wiring diagram
 

I thank you very much for your efforts. I should have pointed out it is a pointy clock wired into a curvy. :oops:

Re: K3 wiring diagram
 

Bump.

Any electrical geniuses <cough, sid squid, cough> want to come and help me out? I officially give up trying to fathom out what I have done wrong. :(

I can offer a warm place to work (front room), lunch and as much tea or coffee as you can drink.

Re: K3 wiring diagram
 

You called?

Stand by the phone, (not too literally), we'll be speaking soon enough.

Re: K3 wiring diagram
 

Thank you. Thank you. Thank you. Thank you. Thank you. Thank you. Thank you. Thank you. Thank you. Thank you. recurring.