Curvy--breaking
 

Righto, breaking an unfaired curvy with 30K on the clocks. Bike is taxed/Mot'd and last used Friday, the 19TH Dec.

Possible sell as an almost complete bike...but ready to use as basis for a track day bike/ project/Mini Twin bike. 'Almost complete' because some bits would/might already been taken off. PM for further details.


1) First bit on list is the engine with starter motor at £300
A little bit of weeping from the centre cover on the cluth side. I bought a new O Ring but never got round to putting it on. That would be provided if I can find it or you get £10 off price. Due an oil and filter change which I would do, unless you want to carry that out yourself. In that case, take another £25 off the price.

I'd also include a free set of carbs which has a bit of a crack at the section the choke plunger goes in(caused by giving a bit too much of a tap trying to free choke. This was a while back now so has obviously worked fine).

2) Radiator with fan/switch(actually off a faired bike) in good condition £80 plus p+p

3) Robby Moto Sports Rearsets.http://www.extremebykesportz.co.uk/x...me.php?cat=631
Lower part of the gear change lever cracked from my rear stand catching it. I I just taped it up and carried on using it :D. They are about £30 to replace and that has been taken into consideration SOLD

4) Front Discs. Straight, true SOLD
5) Standard Foot Rest Hangers SOLD
6) Baglux Tank Cover ?

7) Tank...SOLD

8 ) Bar ends SOLD

9) Luggage Racke SOLD

Weather is a bit crappy for pics(need to give bike a clean anyways lol) so will add ASAP. Feel free to make offers folks ;)



Cheers
Ben

http://i911.photobucket.com/albums/a...L/DSC00107.jpg

http://i911.photobucket.com/albums/a...L/DSC00106.jpg

http://i911.photobucket.com/albums/a...L/DSC00105.jpg

http://i911.photobucket.com/albums/a...L/DSC00104.jpg

http://i911.photobucket.com/albums/a...L/DSC00103.jpg

http://i911.photobucket.com/albums/a...L/DSC00102.jpg

http://i911.photobucket.com/albums/a...L/DSC00101.jpg

http://i911.photobucket.com/albums/a...L/DSC00100.jpg

http://i911.photobucket.com/albums/a...L/DSC00099.jpg

http://i911.photobucket.com/albums/a...L/DSC00098.jpg

http://i911.photobucket.com/albums/a...L/DSC00097.jpg

http://i911.photobucket.com/albums/a...L/DSC00096.jpg

http://i911.photobucket.com/albums/a...L/DSC00095.jpg

http://i911.photobucket.com/albums/a...L/DSC00094.jpg

http://i911.photobucket.com/albums/a...L/DSC00093.jpg

http://i911.photobucket.com/albums/a...L/DSC00092.jpg

http://i911.photobucket.com/albums/a...L/DSC00091.jpg

http://i911.photobucket.com/albums/a...L/DSC00090.jpg

http://i911.photobucket.com/albums/a...L/DSC00089.jpg

http://i911.photobucket.com/albums/a...L/DSC00088.jpg

http://i911.photobucket.com/albums/a...L/DSC00087.jpg

Re: Curvy--breaking
 

What condition are the discs in? Are they OEM? Any idea of the thickness of them?

Cheers

Re: Curvy--breaking
 

OEM Bud.

Good condition...passed MOT in August and have done about 4000K since them.

As of Friday when bike was last used, no pulsing at lever etc. I shall measure thickness and get pics later.


Cheers
Ben

Re: Curvy--breaking
 

Hi mate

Are you breaking the complete bike? Do you have a hugger and cowl?

Re: Curvy--breaking
 

Have you got any bar ends as i have some very wrong ones on my sv at the mo :oops:

Re: Curvy--breaking
 

I would be interested in the ignition barrel / switch assembelly, providing its not crap and you can supply keys with it

Re: Curvy--breaking
 

I'd be interested in the little black plactic infils beneath the riders seat

Re: Curvy--breaking
 

Hiya, yes, breakign completing bike. No hugger or cowl Bud.


Cheers
Ben

Re: Curvy--breaking
 

Hiya £10 for the pair plus postage.


Cheers
Ben

Re: Curvy--breaking
 

Do you have a fuel tank then Ben? If you do what's the condition and colour?

Re: Curvy--breaking
 

We already spoke about it when you enquired about sub-frame about :p

It's red and has a wee ding(paint not cracked) . Apart from that, it's it really really good condition. Definitely take some pics tomorrow for you ;)


Cheers
Ben

Re: Curvy--breaking
 

Ahh same bike soz Ben thought this was a different bike :-) Yer if you could send over a few pics that would be good thanks

Re: Curvy--breaking
 

Soz to mither but you didnt answer are you selling bar ends

Re: Curvy--breaking
 

Farrk.....soz mate. I definitely still have a pair. I shall have a look to confirm condition and let yo know.


Cheers
Ben

Re: Curvy--breaking
 

Thanks appreciate that

Re: Curvy--breaking
 

hi have you got speed idle adjuster and the front wheel speedo drive please how much posted to preston cheers billy oh and i need back light bulb holders

Re: Curvy--breaking
 

Still waiting on pics of the front discs, too :)

Re: Curvy--breaking
 

First post updated with pics.

Bike been stood for about two weeks now gence Rusticc surface on discs.

Update thread again later tonight.



Cheers
Ben

Re: Curvy--breaking
 

Do you have the gear selector rose joint?

And the short upper engine bolts that connect to the frame (not the rods)

Re: Curvy--breaking
 

Them barends are perfect if your selling i will have them off you let me know how much and how to pay you thanks

Re: Curvy--breaking
 

Got me plastic infils this morning, cheers Ben

Re: Curvy--breaking
 

Is that a Baglux tank protector in the pics?

is it ok?

Re: Curvy--breaking
 

Are the marks on the discs light scoring or just the pattern in the metal?

Re: Curvy--breaking
 

Hiya, the rear bulb holders(the plastic you fit the bulbs into) are part of the loom, aren't they. Or are you talking about the metal braket that the rear light attaches to?

Anyhoos, if it's the plastic bits which are part of the loom, yeah, you can have a couple of those, as got a loom, I can rob those off.

Speedo drive, got trapped and a break in wire , which has been soldered and taped up, Apart from that works as it should ...but best to mention that .

All bulb holder(if I've understood correctly), speedo drive and adjuster delivered £40.


Cheers
Ben

Re: Curvy--breaking
 

Hiya,

Re bolts, you mean the ones you'd normally remove to fit the crap Suzuki(or crap aftermarket) frame protectors? Got the rose joint too.
£16 delivered for them.


Cheers
Ben

Re: Curvy--breaking
 

Hiya,

Sorry didn't get back yesterday.

£15 delivered and payment online transfer is best.


Cheers
Ben

Re: Curvy--breaking
 

Hiya, I'd say bit of both....definitely got some scoring but the pads were never down to metal :o so just usual scoring.

It's a difficult one, with things like brake discs really. Definitely no pulsing, no warped.

Best thing I can say with regards to you being happy is, "I'd have them back if you aren't happy with them"...you only pay postage back.


Cheers
Ben

Re: Curvy--breaking
 

Hiya, it's a Baglux tank protector indeed.

It's okay as in, it's definitely going to protexct your tank :p hehe .

It's fine Bud. A bit of fray of the stap in front(see pic), and if you look the middle (rear of petrol filler) you can see where stitching has come off/bit of wear.

All in all, it'd do what it says on the tin :D


Cheers
Ben

Re: Curvy--breaking
 

Good work by Royal Mail :)


Cheers
Ben

Re: Curvy--breaking
 

PM sent on the monorack and plate.

:thumbsup:

btw, I'll be offline for a few days, so if I don't reply immediately it's because I'm in the west of Ireland ;)

Re: Curvy--breaking
 

I'll pass on these for now, then. I only want a pair because my current discs have become scored and look similar to those :D

Once I've got the bike fully back together and rebuilt the calipers I'll take a proper look at the condition of my discs - may be a bit on the thin side, so might need replacing anyway

Re: Curvy--breaking
 

Just sent you a PM , before seeing this. Tis all good...will keep it aside

...be in the West, getting pished then lol


Cheers
Ben

Re: Curvy--breaking
 

Sounds good.

If your discs are not warpped or summat like that and their job properly, I'd say, save your money really...especially if you might be getting ridding of soon anyways :)

Sure, buyer might knock off a bit, when/if you sell but makes sense to do it that way :D


Cheers
Ben

Re: Curvy--breaking
 

I could do with the front master cylinder, front brake lever and the rear brake pedal if you have it and its all in GWO.

Re: Curvy--breaking
 

Front master cylinder is from an N...is that what you need? I might have one off a faired though.

Re rear brake lever, I should have one but I have to locate it first lol. Should do so tonight.

All in very GWO...took a sec or so to work what 'GWO' meant :D

Be back to you tonight.


Cheers
Ben

Re: Curvy--breaking
 

Naked all the way mate ;) have you got a rear brake lever as well?

Re: Curvy--breaking
 

Thats brill will paypal do if so let us know your details

Re: Curvy--breaking
 

jimmy-james, suzijax

Will PM you later. The weather is not too bad today so going to give bike a wash and take a few bits off it...


Cheers
Ben

Re: Curvy--breaking
 

Dont suppose you have the undertray/numberplate assembly?

Re: Curvy--breaking
 

Did you get anywhere with the prices mate?