SV bits - 99 curvy S
 

I have:

Frame - £90 with V5
Engine - £130 (has front sprocket tack welded on, has lots of life in it still, fairly easy to replace)
Swingarm - £40 - good condition
Rear subframe - £50 - good condition

and various other bits. Let me know what bits you'd want and I'll check if I have them :) Pics soon, after I give it all a bit of a clean!

Oh- it's from a '99 SV650S.

Re: SV bits - 99 curvy S
 

Do you have a fender extender or crash bungs mate?

Re: SV bits - 99 curvy S
 

Any front indicators?

Re: SV bits - 99 curvy S
 

Should have a couple of aftermarket indicators I can dig out, if that would suit? And the whole front end is gone, so no fender! I have one usable crash bung but that's probably not much help.

Re: SV bits - 99 curvy S
 

You wouldn't happen to have the rear suspension bell crank would you? You know, the bit that sits under the rear shock and attaches to the frame and dog bones. Mines gone a bit wobbly...oooerrrr missus!

Re: SV bits - 99 curvy S
 

Is it one single R&G bung? If so how much would you want if I could have it

cheers

Re: SV bits - 99 curvy S
 

Rear hugger by any chance? (dibs)

Re: SV bits - 99 curvy S
 

Any pics of the aftermarket indicators and are they LED?

Re: SV bits - 99 curvy S
 

Hi chakraist do you have the rear brake lever ?

Re: SV bits - 99 curvy S
 

lowers if any? fingers crossed (dibs)

Re: SV bits - 99 curvy S
 

No lowers, unfortunately.
I don't believe I have the rear brake lever but I'll have a look tomorrow.
Aftermarket indicators I have about 6 in a box, none are LED. Various condition, from new to buggered. Will try and get a pic tomorrow of the lot!
No rear hugger, that's sold.
The crash bung I have I think has a small mark on it where it's touched down, but I'll take a look over it for you. It's not R&G though.

However! Rich, I do have that part. Have PM'd you.

Re: SV bits - 99 curvy S
 

Do you have the rear caliper?
Cheers

Re: SV bits - 99 curvy S
 

Damn, I'm after a OEM front right indicator but need it immediately.

Re: SV bits - 99 curvy S
 

Gear shifter Arm and peg?

Do you have one of the rubber seals that sits between the mirror and the front fairing? Its kinda oval shaped and keeps the mirror from wobbling everywhere. Bought an SV650s on Sunday and just noticed one of these is missing!

Re: SV bits - 99 curvy S
 

hi u dont have a back tyre do u???/

Re: SV bits - 99 curvy S
 

i have oneavon storm tyre also about to spray it with pollished edges rear wheel pick your colour and see ir we can do a deal

Re: SV bits - 99 curvy S
 

hi i was just after the tyre actually