Old 650 head gasket wanted
 

Hi all, looking for an old head gasket for a 650 99-02 model curvy please. need one for a template to get one made up for my 400. will pay postage. many thanks, Lauren

Re: Old 650 head gasket wanted
 

You could always order one from your dealer, take the template off it, then return it unused for a full refund?

Re: Old 650 head gasket wanted
 

Cant you just lay the gasket paper on top of the head and score the edges to make an impression, or use ink? Ive done that before on a different bike.

Re: Old 650 head gasket wanted
 

I'll probably have on in the garage, where do I post it to?

Re: Old 650 head gasket wanted
 

Yes deffo got one

Re: Old 650 head gasket wanted
 

HI Thanks I am trying to get them made by a company and they want to see if the center of bore is the same for 650 and 400 Thanks suzuki_lady7

Re: Old 650 head gasket wanted
 

cheaper from the use (a lot cheaper) the two OEM ones i got were the price of one from the uk

Re: Old 650 head gasket wanted
 

It would appear that they are the same.

I thought I'd give it a little google and I've found a site listing the SV400 parts fiche. My Russian isn't the best but part numbers should be the same across boarders.

The head gasket is, if its the one I think you're after and using the rear as an example; 11242-19F00 according to this site. Compare that to the SV650 and they are identical, this I deduce that they are one and the same part across engine size.

For reference the SV400 fiche and another SV400 model I do not know the difference. I crossed referenced the part number using Ron Ayers and the reverse part look up. Please double check my workings for your own satisfaction.

Re: Old 650 head gasket wanted
 

^ there you go :D

Re: Old 650 head gasket wanted
 

Hi thanks for your effort i have got a sv400 parts manual and thats is the part no 11141-19f00 and the 650 is 11141-20f00 so its bore 400 is 72mm and 650 is 81mm so looks like the only differance is the cyl hole on the gasket trhanks again guys for the help i have tried cooks fowlers but no joy and my local suzuki dealer said thats the trouble buying an import big help hey Lauren suzuki_lady7

Re: Old 650 head gasket wanted
 

Thats a shame.

All I can suggest with the ordering of parts is Fowlers in Bristol (they will deliver) as I've had import parts from them before or Bikes Direct, again in Bristol but they actually import bikes... direct from Japan so may be able to help. Best of luck.

Re: Old 650 head gasket wanted
 

No 11141-19F00 are available in the UK from Suzuki GB or European stock, ive just checked the european stock system. Suzuki GB supply Fowlers so you wont have any joy there either.

Only way would be a custom made gasket.

Re: Old 650 head gasket wanted
 

Thanks for That you say they are available in the UK from suzuki GB then its a custom gasket dont understand what you mean sorry where do you get a custom gasket from been intouch with comtec no go Lauren

Re: Old 650 head gasket wanted
 

It's been a while since I've done this and it was with Yamaha, but Fowlers have ordered me parts direct from Japan. Took about a month to arrive, but I got the parts in the end. Still worth a shot whats the worst they can say...

Re: Old 650 head gasket wanted
 

They do it via the manufacturer, ie Yamaha will do it for them. Fowlers dont order direct from the factory..I know because we use them for Yamaha etc.

Suzuki dont have any and the part number is not recognised on the european parts database. I can try Suzuki Japan for you but would need a Vin number.

Custom gasket, I meant trying someone like Cometic but you have done that..