curvy alternative rear wheel swap curiosity.
 

evenin' all,

i was just having a ponder, followed by a failed search,
im currently gathering parts for a streetfighter project for my other Sv and was thinking of the back wheel, the sv only has a skinny little one, i know its the suitable size for the bike, but for a custom jobby i was playing with the idea of fitting a wider one, without a swingarm conversion (cause that's just too much of a job) is there any other wheels.... gixxer or something? being the most common interchangeable part, that fits in the sv
its a curvy for reference
:D

Re: curvy rear wheel swap curiosity
 

Be interested to see what response you get.

My bike is in the garage alongside my son's CBR 125 R and a Sachs Speedjet. And it's a close call on whose got the bigger tyre on the back.

It's a bit of a concern that on the same width tyre the SV is shoving out 70 BHP and their bikes combined have less grunt than my lawn mower. Which might also explain why she feels skittish.

Let's hope there is a cheap option out there.

Re: curvy rear wheel swap curiosity
 

Bandit 1200 rear has been done - just needs spacers made I think.

GSXR 06+ also goes on with custom spacers and a bit of machining to the sprocket carrier. I'm sure TWF Racing do a kit for it.

Re: curvy rear wheel swap curiosity
 

yeah the 180's and 190's are almost the standard tyre size nowadays with big bikes. makes the SV's look like a pencil's width. however it was for the SV so i guess its made for the bike. i have no problems with the handling on mine, only in the wet but i run high tyre pressures and iv got a shoulder, but in the dry i swear i'd go off the edge of a tyre one day soon. interesting how 2 same/similar bikes have such massive differences.


Tam was looking on TWF, thats what gave me the thought :P. but they had no clear answers to it, and i know guys like you, northwind and co. are up on what can and can't be done. might look into it :D can't wait to get started on it

Re: curvy rear wheel swap curiosity
 

Come off it, the cbrs could go on a bicycle lol.

I want to change it to the bandit 1200 wheek too.

Re: curvy rear wheel swap curiosity
 

Email Zoran at TWF and see what he's got. I thought he did Bandit spacers too but I don't see them on his site.

Re: curvy rear wheel swap curiosity
 

Not on the site but still available. Also pre srad gsxr wheels or honda F3 wheel.
06 and up gsxr wheel is just most common now and best option since wheel is light.

Re: curvy rear wheel swap curiosity
 

I'm gonna look into it, I'll be starting a thread on the project soon, just need to get some parts to get going :)

Re: curvy rear wheel swap curiosity
 

There's also the option of changing for a custom swing arm. Depends on the look you're after.

I know you can get an arm done by JMC that bolts on and takes an R1 rear (I think 01-03). You just need to know someone who has one for sale so you don't have to pay full whack...nudge, nudge, wink, wink.

Ste

Re: curvy rear wheel swap curiosity
 

If you sort the suspension out the SV is a superb handling bike, the only reason to increase the rear wheel size is asthetics and I suspect you will loose some of the bikes agility.

70bhp through a 160 tyre is easily manageable until late 90's 600cc bikes with 90 - 100bhp used 160's and tyre technology has moved on since then.

Re: curvy alternative rear wheel swap curiosity.
 

Boltonste is that R1 swingarm a big expensive job? If its not too much I may consider it, and how hard is the fitment if you know?
And hardhat_harry you're right it is for aesthetical stuff, iv got 2 sv's so as much as its all about looks, I want to experiment wise. My normal curvy does everything I ask for and iv had favourable references from a guy with a SRAD750 and a 03 600RR. Says a lot about the cheap 'learner' (grr) bike huh :p

Re: curvy alternative rear wheel swap curiosity.
 

No he said get a custom swingarm made by JMC and slot an R1 wheel into it.

Apart from a GSR600 swingarm which Nillie did, the only option is a custom one I think.

Rear exhaust makes fitting anything else a PITA

Re: curvy alternative rear wheel swap curiosity.
 

Like Mav said, it's a custom job from JMC that bolts directly onto the SV. All the mounts etc are there for the stock bike, but it's wider wheel end to hold an R1 wheel/Caliper.

They are several hundred new (JMC are currently not making at the moment due to being burgled (according to the site) but I happen to have one for sale for a lot less http://s948.photobucket.com/albums/a...s/JMC%20swing/

Ste

Re: curvy alternative rear wheel swap curiosity.
 

How much do you want and where is it for sale?

Re: curvy alternative rear wheel swap curiosity.
 

with ya! serves me right for trying to read that on my phone and half asleep!
might have a look into it, see what the situation is once the rest of the bike is done, it'd be a last minute thing