Ermax undertray fitting instructions?
 

Does anyone have this they could possibly scan and post for me? I've acquired an undertray with indicators (cheers Marrus :D) and I've got no idea how to fit it. I also don't have any screws for it or anything like that. Can't see the electrical side of things being a problem, but I'd like to have an idea of what i need to have/do before i start pulling things apart.

Re: Ermax undertray fitting instructions
 

these are are rare as rocking horse poo! just googled it and nothing! i think, a few beers, a couple of hours and a sunny afternoon will do it. I am about to embark on the same thing!

Re: Ermax undertray fitting instructions?
 

Re: Ermax undertray fitting instructions?
 

File is damaged and could not be opened :(

Re: Ermax undertray fitting instructions?
 

Works when I click it....

http://www.pdfhost.net/index.php?Act...53bd3ff299121e

Re: Ermax undertray fitting instructions?
 

Hmm must be my laptopamabob adobe still gives me the 'this file is damaged and cannot be opened or repaired' shpeel.. bugger :(

Re: Ermax undertray fitting instructions?
 

ok try this


or this:

http://108.imagebam.com/download/iMj...structions.png

Re: Ermax undertray fitting instructions?
 

Yep that worked, thanks for your perseverance nikon70 should be of good use to the org and hope its of use to ophic too. Ta muchly.

Re: Ermax undertray fitting instructions?
 

Yay! after five years I can finally fit it!
*edit* sorry 8 years!

Only joking, I ran into too many problems around MOT time with the onboard indicators being hidden by a legal sized number plate. The number plate mounting is also rather flimsy. It looked great but I replaced it with a hamicad in the end.

Ermax undertray fitting instructions?
 

If its for a curvy iv got a set I can upload :)

As people have said number plate blocks the indys.

So I had to move mine

http://img.tapatalk.com/d/13/04/05/2yga6anu.jpg

http://img.tapatalk.com/d/13/04/05/utygusu4.jpg

Re: Ermax undertray fitting instructions?
 

I will have a copy of them destructions from you nicky s if you dont mind :) How did you do that indicator mod? looks good btw.

Re: Ermax undertray fitting instructions?
 

Those indicators are on a few bike shops online or fleabay, search for led triangle indicators, you'll need a couple of resistors with these.

They are flush mounted with sticky back and only a tiny hole drilled for the wire.

Re: Ermax undertray fitting instructions?
 

Tidy ta nikon :)

Re: Ermax undertray fitting instructions?
 

I've seen them on a few bikes, they look good, just be careful where you mount them as to not be obscured by the number plate. Otherwise you have the potential of bing rear ended!

Ermax undertray fitting instructions?
 

I will upload the instructions 2mz as gotta dig them out :)

I removed the indys from the undertray and then drilled to small holes in the plastics for the cable.

I then smothered them in with body filler / sealent then sent off to paint.

Used new 2 pin connectors to connect to the wireing.

Did not need to use any resistors just hade to change the black box under the seat.

Re: Ermax undertray fitting instructions?
 

Tidy, thanks bud :)

Ermax undertray fitting instructions?
 

Sorry taken so long to upload this info I will do it 2mz :)

Re: Ermax undertray fitting instructions?
 

Any sign of them there destructions ;)