Schuberth S1 + Cardo Scala Rider
 

Ladies and Gents

Just purchased this combo. I have not yet got my hands on the Scala rider.

Has anyone fitted one of those or any headset to S1.

Help is much appreciated...

This dark winter months - you know

Re: Schuberth S1 + Cardo Scala Rider
 

Not got a S1, but have fitted a Scala Rider to an AGV Ti-Tech. The unit has a bracket which attaches to the side of the helmet, the inside of the bracket sits between the lining and the inside shell. Fitting is simple and only takes a couple of minutes.

Dave.

Re: Schuberth S1 + Cardo Scala Rider
 

Cheers
I look in to it next week when i have the time and both the lid and the scala rider.

Installed today - autocom www-pages give the instructions how to take the helmet on pieces. Followed those.
Installed the speakers underneath the lining.

The only issue actually was the shirt of the helmet. It needed some cutting. The Scala Riders position can be found by checking the skirt. Where there is a narrow edge on skirt and the mic boom is long enough to be placed in front of mouth it is there and some plastic needs to be removed due the fastening clip on Scala. However if you remove the scala no visual evidence is left.
The skirt is tight to re assemble otherwise easy to do.