Removing all plastics
 

My panels will be going in for a spray once the new mudguard arrives, so I need to remove all the plastics. Got the side panels off no bother, but can't work out how you get the small plastic pins out that hold the two halves together. They are not the same as the "push-in-pull-out" ones in the tail section.

The tail came off ok, but I did cut myself a few times trying to pry off the metal bolt clips.

Didn't have time to start on the front nose section. Is there anything tricky involved? Couldn't find much info in the haynes

Cheers:)

Re: Removing all plastics
 

God knows mate, I broken mine the first time I tried to take them off and never used them again. If I take it you mean the black triangles, the single bolts seem to be sufficient enough to keep them on the rest of the time.
As for the nose cone section, you will need to remove the screen, mirrors and 2 hidden philips screws at the bottom if I remember correctly.

Re: Removing all plastics
 

the black push pins your on about look different but work in a simlair way, just push them out from the inside.

Re: Removing all plastics
 

Cheers guys I'll have a nosey at the weekend