![]() |
DIY Tank raisers
Inspired by a thread I've been contributing to I took a walk to my local hardware shop and bought two 20mm doorstops at 23p each
http://farm3.static.flickr.com/2003/...cbf45a.jpg?v=0 and then popped into the bike shop over the road to buy two M6x40mm bolts at 35p a piece. Half an hour in the garage and I have tank raisers that look pretty good, if I say so myself... and all for a cost of £1-16. http://farm3.static.flickr.com/2365/...7f865a.jpg?v=0 The only other thing I did was pull the snorkel off the airbox, open out the holes in the doorstops with an 8mm drill to take the bolts and cut a small chunk out of the inside of each doorstop with a craft knife to clear the lump in the frame. Dead easy. |
Re: DIY Tank raisers
Nicely done, thrifty and practical ;)
|
Re: DIY Tank raisers
bah................
i did this ages ago after a sv650.org member ripped me off. and i copywrited the idea, |
Re: DIY Tank raisers
It was your post saying you used doorstops that gave me the inspiration. but, I couldn't find any photos so I took my own and posted to give the clueless an idea of what's involved.
|
Re: DIY Tank raisers
Quote:
my solicitors will be in touch |
Re: DIY Tank raisers
As I once said to my dad "To be able to claim intellectual property, you must first have intellect"
|
Re: DIY Tank raisers
Genius, is this to improve airflow to the airbox?
|
Re: DIY Tank raisers
Quote:
|
Re: DIY Tank raisers
Quote:
Quote:
tis true, after the airbox mod, and the tank raiser mod my tezzies grew by a factor od 1.64 :smt119 |
Re: DIY Tank raisers
Quote:
|
All times are GMT. The time now is 05:47 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.