Help stubbying can
 

Want to stubby my can. But don't know how because my can is different to most.

http://forums.sv650.org/showthread.php?t=103083&page=12

See here and get back to me.

Cheers :cool:

Re: Help stubbying can
 

Not sure.

Are those rivets in the endcap or bolts? Whats the black bit round the end of the sleeve?

Re: Help stubbying can
 

On mine they come in and out with an allen key, black bit is piece of rubber

Re: Help stubbying can
 

For those who CBA to look at the other thread heres my exhaust

http://img260.imageshack.us/img260/1787/image065iw7.jpg

http://img411.imageshack.us/img411/9601/image063jb9.jpg

http://img99.imageshack.us/img99/8177/image060rn6.jpg

Re: Help stubbying can
 

oh and btw my chicken strips are that bad cause roads are terrible at minute with loads of roadworks and grit and mud lol

Re: Help stubbying can
 

I think you'll have real problems, purely because of the way the can is made.

My suggestion.................get a cheap end can off e bay, stubby that, then sell yours:D

Re: Help stubbying can
 

i like my micron :( lol, but want it shorter, typical really aint it lol

Re: Help stubbying can
 

What's the other end like, the end that joins to the rest of the exhaust?

Re: Help stubbying can
 

Like I say, cut it down, break the welds on the waste end of the pipe and flange plate, then reweld it onto the part that you're keeping.

The plate being square and true to the end of the can is important fit.

Re: Help stubbying can
 

sounds alot of work lol