SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Idle Banter (http://forums.sv650.org/forumdisplay.php?f=116)
-   -   General Builder Question - Airing Cupboard (http://forums.sv650.org/showthread.php?t=107846)

SV-net 06-04-08 10:30 PM

General Builder Question - Airing Cupboard
 
I just built a stud wall and closed in the hot water tank to be used as an airing cupboard and I dont know if Im supposed to vent the door? Should I vent it at all, my mate said that door will warp.

dirtydog 06-04-08 10:34 PM

Re: General Builder Question - Airing Cupboard
 
If it's just the hot water cylinder then no you don't need to vent it.

why would the door warp?

SV-net 06-04-08 10:42 PM

Re: General Builder Question - Airing Cupboard
 
Ok Cheers.

Alpinestarhero 07-04-08 08:17 AM

Re: General Builder Question - Airing Cupboard
 
The boiler in the airing cuboard at my house is sealed in, like, the door isnt vented and there are no other vents. I can understand that it might warp from the heat of the boiler compared to the heat outside...but only if you have a crap door I guess :D

Matt

timwilky 07-04-08 08:28 AM

Re: General Builder Question - Airing Cupboard
 
Depends what materials you use.

Remember it is an airing cupboard. Not a drying cupboard. Putting wet/damp clothing in there to dry, the water has to go somewhere . That is then why you get warping as the construction materials soak/dry


All times are GMT. The time now is 08:09 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.