![]() |
Changing Gear Lever
Hi all,
I had a bit of an off and bent the gear lever on my 99 SV. I bought a new one but then the job of replacing it didnt look as easy as I first thought. Does someone have a guide of some instructions they could give me to switch it over. Thanks in advance. Crammy |
Re: Changing Gear Lever
Remove the complete rear set from the left side, then remove the bolt behind which holds the foot peg on and your pretty much done!! Give it a good grease when you put it all back together and make sure you tighten the bolts to the correct spec!
Found these in the interweb.... http://www.blackbook.org/2002/10/Ima...sting_bits.jpg http://www.blackbook.org/2002/10/Ima...25.removed.jpg http://www.blackbook.org/2002/10/Ima...reassemble.jpg |
Re: Changing Gear Lever
its a pretty easy job 2 do as DD says remove the hole hanger then just un-do the bolt and your basically done apart from putting it back 2 gather lol.
;) |
Re: Changing Gear Lever
Moly grease or other dry lube is good
|
All times are GMT. The time now is 12:26 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.