Curvey lowers in black -links edited
 

These are not perfect. Read below

LHS:


http://www.colbs.co.uk/sv650/lhs clsoe up.jpg

As you can see the scratches are minimal


http://www.colbs.co.uk/sv650/IMG_9743.JPG

The little black bit needs to be fibreglassed back on. Although I've been riding with it missing for a while so its not so important.

RHS:

http://www.colbs.co.uk/sv650/IMG_9739.JPG

This is the overall picture


http://www.colbs.co.uk/sv650/rhs close up.jpg

The top bit circled in red is the crack. The lower bit are some scratches.


http://www.colbs.co.uk/sv650/rhs close up 2.jpg

The top right red outline is the crack (around the edge of the upper hole) The other bits are scratches. The top left red circle will need respraying

The fitting kit is a matter of a few weeks old. This I got from Robinsons Foundry for 20 quid delivered. I still have the instructions.

So overall there are 2 cracks in the RHS fairing and a few scratches. Most will polish out to some degree excpet for the one mentioned above. The left side is pretty much perfect apart from the small bit having broken off. This can either be left off or fibreglassed/fillered back on from the inside.

So how much would I want for the lowers. If I broke it down to 30 pound per panel and 15 for the fitting kit it would add up to £75

How does that catch you?

Re: Curvey lowers in black
 

BUMP - Edited the links

Re: Curvey lowers in black
 

abit to much mate, as they are broken/scratched etc,

Stick them on the bay :rolleyes:

Re: Curvey lowers in black
 

PM'd

Re: Curvey lowers in black
 

replied