SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Engine cutting off problem (http://forums.sv650.org/showthread.php?t=111713)

mikeyd 06-06-08 11:33 PM

Engine cutting off problem
 
I have a problem when my bike idles. it is a 2004 SV650. At times it will cut off while idling. other times it will cut off when i hold the clutch to stop and other times(more often than others) it will cut off when i suddenly give it gas from idle speed. i think that it is too low of an idle speed but i don't know how to get to the screw that adjusts the idle speed. this is my first bike and i don't know much about the mechanics yet.
thanks, mike

yorkie_chris 06-06-08 11:34 PM

Re: Engine cutting off problem
 
What's it ticking over at?

mikeyd 06-06-08 11:37 PM

Re: Engine cutting off problem
 
it goes under 1k and just dies

yorkie_chris 06-06-08 11:38 PM

Re: Engine cutting off problem
 
Sounds like it needs turning up a little then, not sure where the adjuster is on a pointy.

mikeyd 06-06-08 11:39 PM

Re: Engine cutting off problem
 
thank you for the help. i am completely new to this

yorkie_chris 06-06-08 11:40 PM

Re: Engine cutting off problem
 
Salreet. I'd advise you to get a haynes manual and have a read, it's interesting even if you don't like scary photos of the inside of a gearbox.

mikeyd 06-06-08 11:41 PM

Re: Engine cutting off problem
 
will do thanks

mikeyd 07-06-08 12:25 AM

Re: Engine cutting off problem
 
it only has 1900 miles do you think that i really NEED a tune up or would it just be a wise idea with the problem?

yorkie_chris 07-06-08 12:26 AM

Re: Engine cutting off problem
 
Probably everything settles in a bit after manufacture. TPS setting up properly and a throttle balancing won't hurt it.

mikeyd 07-06-08 12:32 AM

Re: Engine cutting off problem
 
TPS?


All times are GMT. The time now is 05:37 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.