Wanted: Front brake master cylinder
 

As title, for K3S.

I don't need reservoir or lever.

:)

Re: Wanted: Front brake master cylinder
 

If no luck with an SV part you can get a full swap with something like a GSXR off of ebay.

Example

Re: Wanted: Front brake master cylinder
 

Any master cylinder will work.

My Z750 needed one, ended up with one of of an early 2000's ZX6, now running with a 2001 naked SV one.

They all do the same job, and most will fit.

Re: Wanted: Front brake master cylinder
 

aye thers alot of master cylinders that will fit no problem.tho i would make sure its of a bigger bike with a twin brake disc set up and not an older bike or a 50cc or 125 with a single brake disc set up.

Re: Wanted: Front brake master cylinder
 

Like most Jap bikes, your MC will have been made by Nissin. Hence the interchangeable nature of the part.

And in most cases,. your brake lever should fit the new unit no matter what it came from - even the brake light switch is probably the same.

Re: Wanted: Front brake master cylinder
 

Thanks chaps. It's for my minitwin race bike, so really need to replace it with an SV part, to make sure nobody claims any other part gives me an advantage....

Re: Wanted: Front brake master cylinder
 

Hi mate, got one. Not sure what state its in. May need new seals etc.

Re: Wanted: Front brake master cylinder
 

You have PM :cool:

Re: Wanted: Front brake master cylinder
 

Boing.

Still need one of these - with reservoir would be good, now. :)

Come on, someone must have one for me!

Re: Wanted: Front brake master cylinder
 

PM Sent