![]() |
how low can you lean an curvy SV650s
..... quite a long way, my gay bands are now non existant, but there is a down fall to this! if your going to lean it that low, say bye bye to your foot rest stud, and the bottom half of your foot rest, and the rear brake pedal, and the paint on your lower fairings!! lol
this is what my bike looks like after going round the corners too fast!! lol http://img.photobucket.com/albums/v7...l/DSC00189.jpg http://img.photobucket.com/albums/v7...l/DSC00190.jpg http://img.photobucket.com/albums/v7...l/DSC00191.jpg http://img.photobucket.com/albums/v7...l/DSC00192.jpg to tell you the truth... i am suprised the bike didnt slip away from underneath me. was good fun!! lol Adam |
Re: how low can you lean an curvy SV650s
Wow, that is damn cool! How did you get the confidence to do that? what kind of surface was it on? track?
|
Re: how low can you lean an curvy SV650s
slowly going faster and faster, and hours and hours of practice :o)
i have never taken my bike on a track, this was on the local industrial estate, and the road surfaces are not that smooth either, just keep an eye out for the pot holes! lol |
Re: how low can you lean an curvy SV650s
wow that was low surprised you've still got a right foot
|
Re: how low can you lean an curvy SV650s
Good effort!
|
Re: how low can you lean an curvy SV650s
Quote:
|
Re: how low can you lean an curvy SV650s
Quote:
As you say, you are lucky that didn't touch the can or summin, lift the rear end and spit you off!! :shock: |
Re: how low can you lean an curvy SV650s
That tyre can lean a bit more!
|
Re: how low can you lean an curvy SV650s
<sits back and awaits 'wanted, yellow R/H lower fairing' post>
|
Re: how low can you lean an curvy SV650s
I didn't know there was an industrial estate in Bedfordshire that had a decent enough surface to do this. The ones I've found are normally covered with screws, nails, lose stones etc...
At least if I see a yellow curvy with it's side scuffed up I'll know who it is. :D |
All times are GMT. The time now is 04:25 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.