Aftermarket bar end plugs for std bars
 

Hi,

Does anyone know any aftermarket bar end plugs that definitely fit into a set of standard k3 clipons. its now a race bike so cheap could be good they can be made of anything, a decent rubber plug that isn't going to come out for instance would be ideal

many thanks

Re: Aftermarket bar end plugs for std bars
 

as said in the other thread you started the same as this one you can get we plastic plugs for race bikes they pass scrutineering no problem and they probley cost very little from any race parts shop!

i use the slim line bar ends on my race bike if thats any good 2 ya.

Re: Aftermarket bar end plugs for std bars
 

I tried the race part shop at the track and nothing they had fitted out of 4 styles, not without really being hammered in anyway, are you meant to really hammer them in? As they were quite hard I was a bit worried about splitting the bar. Cheers for the product name I have now got something that I know definatley works


Sorry about double posting have asked this on two forums and forgot that I had.

Re: Aftermarket bar end plugs for std bars
 

im not sure how hard ther ment 2 be 2 get in but im sure ther ment 2 be hardish otherwise they will come out!

what sorta style are you looking for??? is it plastic/nylon your looking or what?

as said above i have we slimline ones on all my race bikes ther small light and do the job.

;)

Re: Aftermarket bar end plugs for std bars
 

don't really mind about style, would probably prefer the nylon style that form a sort of round ball on the end of the bar. I should have tried a little harder to get them in, did you have to use a mallet to get yours in, and the very subjective was it a tap or a whack job? I didn't really want to split my clipons just before a race.

Re: Aftermarket bar end plugs for std bars
 

ive never used them before 2 be honest so i dont no how hard ther ment 2 be 2 put on but im sure ther ment 2 be pretty hard or they will come out.

im sure out of 4 different sizes/styles ther will be one metn 2 be for the size of the sv clip on so whice ever one gose in the best but tightish i would go for.


;)

Re: Aftermarket bar end plugs for std bars
 

Tried R&G's bar end sliders, the only good product they make for the SV650!

Re: Aftermarket bar end plugs for std bars
 

How do they attach? The internal thread thing is already a mess on mine, not sure if I want to spend £20 as well when there is probably something for a quid.

Re: Aftermarket bar end plugs for std bars
 

think the R&g are a bolt fixing if where you bolt the bar end on to is f**ked on your clip ons then the we push in nylon bar ends will be best for ya.

;)

Re: Aftermarket bar end plugs for std bars
 

sound like a plan, as a matter of interest which club are you racing with?