SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Advice please (http://forums.sv650.org/showthread.php?t=114230)

appollo1 19-07-08 11:08 PM

Advice please
 
I have had a look through the threads and can't seem to find anything for my problem.

I have a 2000 W reg curvey S with ART can, Datatool system 3.

I was out today and after a couple of hours about 100 miles I stopped for fuel. When I went back to bike it would not start. I managed to bump start the bike and all was ok. I noticed that the speedo and rev counter was going haywire so I swithched off my lights and everything appeared to be normal. When I got back one of my mates adjusted the idle speed as he said it was running a bit fast (2000rpm). My bike was switched off and left for a while and when I went back to it, it started no problem.

The problem seems to be when I am riding for any length of time with my lights on (necessary for safety) as it doesn't appear to have any effect when the lights are off.

Any suggestions would be greatly received. Please bear in mind I am not in any way mechanically minded so please try and explain any checks you think I may have to do in simple talk.

Thanks in advance.

dizzyblonde 19-07-08 11:11 PM

Re: Advice please
 
reg/rec....someone with grubby hands will be along shortly to explain what to do.......

yorkie_chris 19-07-08 11:15 PM

Re: Advice please
 
Lol indeed.

Yeah that sounds like a likely suspect, if you've got a voltmeter then check what it's charging at.

That's where you get to the battery as if you're charging it, but put the voltmeter set to "0-20 DCV" or something like that across the terminals, with the bike running.

appollo1 19-07-08 11:20 PM

Re: Advice please
 
Quote:

Originally Posted by dizzyblonde (Post 1573312)
reg/rec....someone with grubby hands will be along shortly to explain what to do.......


LOL thanks


Yorkie I've got a voltmeter thing in my garage somewhere but there are so many settings for it. Any more info please???

dizzyblonde 19-07-08 11:21 PM

Re: Advice please
 
seee I told you someone with grubby hands would be along!!!;-)

yorkie_chris 19-07-08 11:21 PM

Re: Advice please
 
there'll be a setting for DC voltage, probably with different ranges. I think mine does 0-2000mV 0-20V 0-200V and 0-2000V

Biker Biggles 20-07-08 05:56 PM

Re: Advice please
 
You are looking for about 13--15 volts DC across the battery terminals with engine running at about 5000RPM and the lights on.So set the meter up to cover that range.If you dont get that come back for further advice-------?

appollo1 20-07-08 10:44 PM

Re: Advice please
 
Thanks I'll give it a check tomorrow.

appollo1 21-07-08 11:29 AM

Re: Advice please
 
Update

I've just checked the battery and th eresults as follows:

Idle - lights off - 13.61
Idle - Lights on - 13.52

Lights off 5000 revs - 13.34
Lights on 5000 revs - 13.13


Does that make any sense to anyone?:confused::confused::confused:

Any help is greatly appreciated as I plan to go to the Glencoe Massacre (Scottish Forum) and want to make sure my bike is ok as I don't want it packing up on me.

Thanks

appollo1 21-07-08 03:18 PM

Re: Advice please
 
Anyone help please


All times are GMT. The time now is 06:53 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.