![]() |
Front and rear Subframes to fit K6 SV650s
Hi. The title says it all really! I also need brackets for lower fairing. Can anyone help?:confused:
Cheers folks! :cool: |
Re: Front and rear Subframes to fit K6 SV650s
try sv spares for them.
|
Re: Front and rear Subframes to fit K6 SV650s
|
Re: Front and rear Subframes to fit K6 SV650s
Hi
Thanks for the hint but already called them and they have no front subframes and only the pre '04 steel rears. Still they sorted me out with loads of other bits! I think it may mean paying Suzuki prices for the front subframe tbh. |
Re: Front and rear Subframes to fit K6 SV650s
I've got a front subframe, but the 2 arms are bent slightly. Bit of scaffolding pole over the end and it will be fine though.
? |
Re: Front and rear Subframes to fit K6 SV650s
Cheers dude, how bent are they - any chance of a pic? I'm not confident I could straighten it properly, otherwise I'd have had a go at my old one!
|
Re: Front and rear Subframes to fit K6 SV650s
The bit that goes up to the mirrors is about 1 inch lower than it should be. So a bend of maybe 10 / 15 degrees.
Best way of straightening is to bolt it to the bike, me and my dad did it in about 90 seconds. |
Re: Front and rear Subframes to fit K6 SV650s
I'll have a bit more scout about for an unbent one but may come back to you on this one! Thanks for the offer though.
|
Re: Front and rear Subframes to fit K6 SV650s
No problems, I'm here all week ;)
|
Re: Front and rear Subframes to fit K6 SV650s
Hi all
A quick bump! I now have front subframe but need a straight rear one (ally not steel). I also need a set of yokes as the ones I got from the breakers are pretty corroded and would rather try and source a cleaner set. Can anyone help? |
All times are GMT. The time now is 10:53 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.