![]() |
My crack has gone....
I had a crack on my lowers at the engine fixing bolt area.
So i had an idea to fix it....... Soldering Iron across the crack to bond it and then using a cable tie, i melted it like you would with solder and fixed it over the top of the crack. Good as new now :D Just had to share my handy work with someone......:cheers: |
Re: My crack has gone....
pictures please...
|
Re: My crack has gone....
did you use a matching colour cable tie?
|
Re: My crack has gone....
Quote:
yes actually :cool: |
Re: My crack has gone....
was it a cable tie ,or one designed for plants.
If you would have asked me I could have supplied you with the tools and weld that is used for vinyl floors. May have melted the cheapo SV plastic used on pointies though |
Re: My crack has gone....
Quote:
It was a cable tie. The crack was only half inch if that, and very thin. ;) |
Re: My crack has gone....
a half inch crack .... :rolleyes:
|
Re: My crack has gone....
i think it's a genius bodge.. opps i mean fix ;)
|
Re: My crack has gone....
Quote:
see carpet layer!! |
Re: My crack has gone....
|
All times are GMT. The time now is 05:13 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.