SV650.org - SV650 & Gladius 650 Forum
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Akrapovic on an 08 sensor issue query (http://forums.sv650.org/showthread.php?t=116893)

Griffo 02-09-08 10:23 AM
Akrapovic on an 08 sensor issue query
 
Hi all,

I'm having an Akrapovic full system put on my lovely '08 SV650 Sport at the moment, however the garage just called with a problem:

As there is no Lambda (oxygen) sensor slot on this exhaust they usually fit a resistor to the lambda sensor so it doesn't throw an error on the ECU, however there is no resistor available for the 08 model SV650! He wanted to use an '07 version but good old Suzuki have doubled the voltage since '07 he tells me.

Have any of you lot fitted an aftermarket full exhaust to an 08 SV and had to get around the lack of a labda sensor?

At the moment when mine is started it displays the engine management light, and he's a bit worried it'll mess my fuelling up.

He also tells me one route would be to find someone who can drill a hole in the new system and install the existing sensor there, but this is something they cannot do.

Any help/sources greatly appreciated! I was hoping to get the bike back thursday but now it isn't looking so good :(

Griffo 02-09-08 12:17 PM
Re: Akrapovic on an 08 sensor issue query
 
Has anybody fitted a full system to a 2008 and got round this?

Alpinestarhero 02-09-08 12:21 PM
Re: Akrapovic on an 08 sensor issue query
 
As far as I know, very few people have had this issue due to very few people with K8 SV's fitting an after-market exhaust!

Where should the sensor be, in the link-pipe part or in the can itself?

Matt

Griffo 02-09-08 12:29 PM
Re: Akrapovic on an 08 sensor issue query
 
Oh man, that's annoying, any reason why or just because it's early days?

Well, the sensor goes in the link-pipe bit that they've already replaced to put the new lot on, I believe. Like the 2007 model but different voltage for some great probably pretty pointless reason.
Otherwise i'm going to have to try and find a welder in Brum that can punch a hole in the pipe and add a thread :/ Dunno if that's doable.

Nobbylad 02-09-08 12:33 PM
Re: Akrapovic on an 08 sensor issue query
 
Quote:
Originally Posted by Griffo (Post 1612246)
Hi all,

I'm having an Akrapovic full system put on my lovely '08 SV650 Sport at the moment, however the garage just called with a problem:

As there is no Lambda (oxygen) sensor slot on this exhaust they usually fit a resistor to the lambda sensor so it doesn't throw an error on the ECU, however there is no resistor available for the 08 model SV650! He wanted to use an '07 version but good old Suzuki have doubled the voltage since '07 he tells me.

Have any of you lot fitted an aftermarket full exhaust to an 08 SV and had to get around the lack of a labda sensor?

At the moment when mine is started it displays the engine management light, and he's a bit worried it'll mess my fuelling up.

He also tells me one route would be to find someone who can drill a hole in the new system and install the existing sensor there, but this is something they cannot do.

Any help/sources greatly appreciated! I was hoping to get the bike back thursday but now it isn't looking so good :(
Presumably they can work out what resistor they need even though the voltage has changed? :confused:

Griffo 02-09-08 12:41 PM
Re: Akrapovic on an 08 sensor issue query
 
Quote:
Originally Posted by Nobbylad (Post 1612418)
Presumably they can work out what resistor they need even though the voltage has changed? :confused:
That's what I'd have thought. I'll Google some more when I get a moment but nothing yet. Otherwise I'll try calling Akrapovic perhaps.

Dangerous Dave 02-09-08 04:22 PM
Re: Akrapovic on an 08 sensor issue query
 
Quote:
Originally Posted by Griffo (Post 1612426)
Otherwise I'll try calling Akrapovic perhaps.
Good idea, they will tell you for sure what they recommend. I haven't put a full system on a K8 yet, my logic would be to follow the same route as with a K7. Are they sure it is different, the bikes are identical?

I wouldn't bother putting the sensor into the Akrapovic system as it would screw things up, it works on the principal that it would be a stock bike.

Griffo 02-09-08 04:26 PM
Re: Akrapovic on an 08 sensor issue query
 
Quote:
Originally Posted by Dangerous Dave (Post 1612667)
Good idea, they will tell you for sure what they recommend. I haven't put a full system on a K8 yet, my logic would be to follow the same route as with a K7. Are they sure it is different, the bikes are identical?

I wouldn't bother putting the sensor into the Akrapovic system as it would screw things up, it works on the principal that it would be a stock bike.
Ah, thanks Dave :). So i'd get a warning anyway due to the different exhaust pressures etc?

I'm pretty sure the guys at the garage tried the k7 resistor but it didn't do the job, he said the voltage going to the sensor appears to be double that of the K7 and 'normal bikes'.

TSM 02-09-08 06:01 PM
Re: Akrapovic on an 08 sensor issue query
 
there is a reason the sensor is there, the SV is now a closed loop fuel system, the sensor compensates fueling on the engine, it would be probably best to get the nut wealded onto the pipework and fitted, as its k8 its still under warranty and keep running it on FI your warranty is possably up the spout

Griffo 02-09-08 08:20 PM
Re: Akrapovic on an 08 sensor issue query
 
FI means what sorry?


All times are GMT. The time now is 10:15 AM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.