![]() |
Headlight electrics - only one light works
My SK3 has been suffering from an intermittent headlight problem, but I have the problem more times than not. The nearside headlight has both filaments dimly lit the whole time (except when you depress the pass switch in which case neither filament is lit), with the side effect that the high-beam telltale glows. The offside light is unaffected and it is not a faulty bulb.
http://i226.photobucket.com/albums/d.../badlights.jpg The picture give an indication, but the nearside is probably a bit brighter in real life. As only one side is affected I assume the problem must be a short/broken wire after the loom splits for the two lights (or are they wired in series?). I have visually checked the loom and cannot see any obvious problems. Does anyone have any suggestions as to likely trouble spots for this kind of problem? |
Re: Headlight electrics - only one light works
Quote:
Haven't got the wiring diagrams with me at the moment unfortunately. |
Re: Headlight electrics - only one light works
Quote:
|
All times are GMT. The time now is 03:09 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.