SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   Paging anyone with a Yamaha 250 or 350LC (http://forums.sv650.org/showthread.php?t=120431)

Lozzo 30-10-08 12:29 PM

Paging anyone with a Yamaha 250 or 350LC
 
I need to know what the length of the forks is when fully extended please, also how far apart the forks are mounted. An overall measurement from outside of one leg to outside of the other would suffice as the diameters are the same on the project I'm planning.

Thanks

RingDing 30-10-08 12:50 PM

Re: Paging anyone with a Yamaha 250 or 350LC
 
Not sure if I'll get a chance to check tonight but I can measure mine up. Might have to wait until Fri evening is all...

Lozzo 30-10-08 01:05 PM

Re: Paging anyone with a Yamaha 250 or 350LC
 
Quote:

Originally Posted by RingDing (Post 1671522)
Not sure if I'll get a chance to check tonight but I can measure mine up. Might have to wait until Fri evening is all...


That'll be fine, there's no immediate rush.

Thanks

RingDing 30-10-08 05:50 PM

Re: Paging anyone with a Yamaha 250 or 350LC
 
Got home earlier than expected.

Top of fork to center of axle = 738mm

Outer edge of one fork to the other = 210mm

Accuracy of approximately 2mm I'd say.

Couldn't get a center to center measurement on the forks as the bar mount gets in the way. If I can find the spare yoke in the shed at the weekend I can measure that for you.

Good luck with the project, looks interesting.

Lozzo 30-10-08 11:31 PM

Re: Paging anyone with a Yamaha 250 or 350LC
 
Thanks so much, that's helped greatly.

RingDing 31-10-08 07:04 AM

Re: Paging anyone with a Yamaha 250 or 350LC
 
No worries.


All times are GMT. The time now is 02:53 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.