Stainless Steel Micron Race headers/downpipe for Pointys
 

Spotted this from George Whites on eBay , a bargain if you ask me , would have bagged them myself but they are Hi-Level

http://cgi.ebay.co.uk/SUZUKI-SV650S-K3-MICRON-STAINLESS-RACE-DOWNPIPE-SET_W0QQitemZ310113192236QQcmdZViewItemQQptZUK_Mot orcycle_Parts?hash=item310113192236&_trksid=p3286. c0.m14&_trkparms=72%3A1299|66%3A2|65%3A12|39%3A1|2 40%3A1318

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

will be listing on Ebay, brand new Micron header pipes and slightly used low level system this week

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

Just be sure you can get your old system off first. THe bolts like to sieze on :roll:

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

+1 to that! I ordered the Micron system from George Whites too!

Both the front header bolts sheared off! So I ended up drilling them out and re tapping the threads!

Oh and also the link pipe is 57mm OD IIRC, so check if you need to modify your can. I managed to get hold of some 60mmOD (57mm ID)stainless pipe, so I TIG'd that on instead of the existing 50mm.:rolleyes:

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

What diameter are the micron down pipes? I have a hi-level Leovince and if I could get the microns to fit I'd buy them.

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

Mine. Bought.

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

Glad to be of service to an Orger :)

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

Meh they dont have any curvy fit ones left :( I need a system for my project bike :( (after angle grinding the old one off in a burst of frustration :mrgreen: )
J

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

Best full system for the curvy is leo vince, or chances are you will be able to get a stock one very cheaply.

Re: Stainless Steel Micron Race headers/downpipe for Pointys
 

Anyone know the diameter of these?