SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   Gear lever adjustment? (http://forums.sv650.org/showthread.php?t=125419)

heros 10-02-09 02:42 PM

Gear lever adjustment?
 
bit of a noobie question here but can u adjust the gear level by height at all? if so can you point me in the right direction :) (on a bandit 650)

Tomtoms 10-02-09 03:06 PM

Re: quick q :D
 
well on an SV there is a connecting rod coming from the lever itself, either end of this you will see lock nuts. These can be loosened and the connecting rod adjusted, then tighten up to lock nuts again.

This will bring the lever up and down...on an SV!

have a closer look and im sure it will be similar, if not the same!

Jester666 10-02-09 03:38 PM

Re: quick q :D
 
It's the same set up as the SV.

You can also undo the bolt that holds the selector onto the outlet shaft and move the lever up or down. Usualy a 10mm bolt.

heros 10-02-09 06:51 PM

Re: Gear lever adjustment?
 
many thanks guys :)

yorkie_chris 10-02-09 09:13 PM

Re: Gear lever adjustment?
 
Don't forget one end of the rod is LH thread.


All times are GMT. The time now is 10:19 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.