Curvy bits and bobs needed
 

I'm after a few bits for my '99 650 project thought i'd try here to help out a orger rather than the shops... So if you've got any spares sitting in the garage gathering dust.

So I'm after...
Front brake lever
Clutch lever
Throttle cables
Clutch cable
Choke cable
RHS switch gear
Brake pads - Front and rear
Chain and sprockets
Clutch plates

And on the off chance...
Right and left engine cover gaskets

ta
J

Re: Curvy bits and bobs needed
 

Thats some list , sadly i cant help but i hope someone comes along with what you need!.

Re: Curvy bits and bobs needed
 

Other than the switchgear and levers I'd be looking at buying new. ebay, local shop, online parts sites - they're all servicing parts other than the plates maybe. I got a complete set of front pads for £38 posted off ebay recently (ebc-hh).

Re: Curvy bits and bobs needed
 

I have a switchgear by the way took it off because the little nubbin was broken and ordered one from someone off here, got the new one and it had the same issue :rolleyes:
But once fitted turns out it was fine anyway!

Re: Curvy bits and bobs needed
 

Have you still got the seller info?
ta
J

Re: Curvy bits and bobs needed
 

Got a dirty set of chain and sprockets. They've done about 7800 miles.

But not rusty, just filthy.

Chain is unbroken as I removed the swingarm as part of my winter refurb.

Could be pricey to post mind

Re: Curvy bits and bobs needed
 

egypt22? Might have been a one off tohugh he wasn;t a power seller.

Re: Curvy bits and bobs needed
 

I have a choke cable (reasonable nick) for an S model. (too short for proper handlebars). And a couple of complete clutch packs. I've not tested the clutches, but will check for thickness and warp.
Which bits you need?