SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   leaky bleed valve on rear caliper of my curvey????????????????????? (http://forums.sv650.org/showthread.php?t=129058)

nitrous_az 03-04-09 06:54 PM

leaky bleed valve on rear caliper of my curvey?????????????????????
 
Hi I have a leaky bleed valve on my rear caliper on my sv650 and was wondering if anyone knows how I could stop this I think I may need a new caliper but would prefer a cheaper option????????????????????????????????????????????

ANYONE.

thefallenangel 03-04-09 07:05 PM

Re: leaky bleed valve on rear caliper of my curvey?????????????????????
 
New bleed valve or PTFE on the bleed valve if it's leaky on the threads.

Geoffrey 03-04-09 07:53 PM

Re: leaky bleed valve on rear caliper of my curvey?????????????????????
 
remove the bleed nipple and clean the end of it and the hole it sits in, it is not the thread that seals. if it leaks at the thread then it is not going in fully and making a flush fit.

flymo 03-04-09 09:11 PM

Re: leaky bleed valve on rear caliper of my curvey?????????????????????
 
this is usually rust on the coned sealing surface, or sometimes a worn surface.

You can get good quality stainless replacement bleed nipples from Tasty Nuts.

nitrous_az 03-04-09 11:05 PM

Re: leaky bleed valve on rear caliper of my curvey?????????????????????
 
Thanks for the heads up will give it a clean and sort out tommorow cheers.


All times are GMT. The time now is 06:58 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.