SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Raising Seat Height (http://forums.sv650.org/showthread.php?t=129816)

Mattnut 15-04-09 10:19 AM

Raising Seat Height
 
Hello,
Ive been riding my 1st sv 650s for a few months now and ive concluded that it has been lowered in the past. does anybody know the standard rear shock length and the length of the suspension link bar (dog Bone). So i can work out what has been altered....

Many Thanks
Mattnut:)

Viney 15-04-09 10:30 AM

Re: Raising Seat Height
 
I dont know the length, but the dog bones look exactly like that. Most after market ones dont.

charlie13 15-04-09 11:44 AM

Re: Raising Seat Height
 
standard rear shock on a curvy is 337mm centre to centre of the mounting holes, not sure about pointy version

Mattnut 15-04-09 12:04 PM

Re: Raising Seat Height
 
Thanks Very Much.

Now all i need is the dog bone length!

charlie13 15-04-09 12:09 PM

Re: Raising Seat Height
 
quick measure in the car park says 105mm between centres on the dogbones

muddycoffee 27-04-09 07:42 PM

Re: Raising Seat Height
 
Shorter Dog bones of 102mm will raise the seat by 20 mm and the tail by 40mm apparently. I just got mine through but I haven't fitted them yet. It says in the instructions that there is only a tiny difference in the measurements required.

Mattnut 27-04-09 09:05 PM

Re: Raising Seat Height
 
Where did you get them from mate??

Would ya post the results let me know how you got on cheers

charlie13 30-04-09 07:00 AM

Re: Raising Seat Height
 
there's loads on offer on ebay if you have a trawl through, from about £15. Or you could get a new shock with adjustable ride height . . . . .


All times are GMT. The time now is 11:52 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.