![]() |
Exhaust identity?
1 Attachment(s)
Hi, can anyone identify the exhaust that is fitted to my sv. the only markings are BSAU193T2 on a small rectangular plate welded to inside rear of the oval can which is retained by springs and a clamp. The system is stainless and the can cannot be rebuilt, ie, no pop rivitted ends. Thanks in anticipation
|
Re: Identity parade
Most likely a cheaper brandless one from fleabay.. :|
|
Re: Identity parade
maybe, but the construction, sound, and quality are good.
|
Re: Identity parade
its also a full system which are very rare... M4 mabee
|
Re: Identity parade
M4 the maker? it is a full system and was on bike when bought.
|
Re: Identity parade
Sorry, very off topic, but how have you made the tail tidy for the back end? I'd love the back of my bike to look like that!
|
Re: Identity parade
hi, bought stainless made tailtidy from american ebay with numberplate light, blinkin expensive!! + got stung with import. then get your sharpest hacksaw blade and cut off the rear mudguard and drill and bolt tailtidy on. angle of numberplate is a bit steep but it clears exhaust. ill go looking and see if i can find details
|
Re: Identity parade
Wideboy did a whole thread on how to make them, it's on here somewhere.
|
Re: Identity parade
when i saw it i thought i could have made that, but i did make the selfish seat
|
Re: Exhaust identity?
it is a micron full exhaust system, not an m4
|
All times are GMT. The time now is 01:26 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.