SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - m4 exhaust springs (http://forums.sv650.org/showthread.php?t=132223)

skyline

19-05-09 11:56 PM

m4 exhaust springs

Hiya everyone, :)

Real quick question but I'm sorting out my m4 full system for my curvy but just realised I'm gonna need some exhaust springs for the front header pipes... ](*,)

Anyone with an m4 system here who knows what size they would need to be?

Cheers all!

drag	20-05-09 02:12 PM

Re: m4 exhaust springs

New or 2nd hand system ?

Geoffrey

20-05-09 02:34 PM

Re: m4 exhaust springs

have a look on ebay as there are akrapovic ones on there which could be the correct length, or lock wire

yorkie_chris

20-05-09 04:15 PM

Re: m4 exhaust springs

Good question. Mine doesn't have owt on there and it hasn't fallen off yet. Will lockwire it later.

rowdy

20-05-09 04:23 PM

Re: m4 exhaust springs

3 inch

dirtydog

20-05-09 04:28 PM

Re: m4 exhaust springs

Quote:

Originally Posted by yorkie_chris (Post 1914889)

Good question. Mine doesn't have owt on there and it hasn't fallen off yet. Will lockwire it later.

I ran my akra system with no springs for ages and it didn't fall off either

skyline

22-05-09 01:29 PM

Re: m4 exhaust springs

Cheers everyone! Cheers also for the spring size Rowdy :D

I'm tempted to run the system without the springs but sod's law says it'll fall off sooner or later...I might end up doing both, putting the spring on then lockwire through the spring and leave a little slack in the wire so the spring can still work.

So off to ebay to get two springs 75mm for a fiver plus p & p...:shock:

Cheers again for your help people :thumbsup:

All times are GMT. The time now is 11:44 AM.