SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Leaking water (http://forums.sv650.org/showthread.php?t=132474)

defiant 24-05-09 08:10 PM

Leaking water
 
Just back from a great spin, really stretched her legs but i appear to have developed a leak from the thermostat housing. There is water dripping from the seam.
It will be a few days before i get a chance to take a good look at it.
Have any of you guys seen this before?
I'm hoping some instant gasket will take care of it...

yorkie_chris 24-05-09 08:40 PM

Re: Leaking water
 
It's rare. Have a go with instant gasket but don't use loads of the stuff, just a small smear. You want to avoid pushing any film of it into the cooling system.

defiant 24-05-09 08:46 PM

Re: Leaking water
 
She got worked real hard today. On her limit trying to keep up with much bigger bikes over a couple of hundred miles.
Do you think i might have pushed her a little too hard?
Built up too much pressure in the system or something?

yorkie_chris 24-05-09 09:03 PM

Re: Leaking water
 
Nah I ragged the buggerance out of mine 2 up chasing a midget wearing a sheep all over scotland and back and nothing went bang.

I would also imagine the hoses would fail before the thermostat gasket due to pressure alone.

defiant 24-05-09 09:16 PM

Re: Leaking water
 
Yeah, pretty stupid question.
I'll try sealing it...

yorkie_chris 24-05-09 09:25 PM

Re: Leaking water
 
Have fun ;-)

Dicky Ticker 24-05-09 09:54 PM

Re: Leaking water
 
If you are removing it to put gasket sealant on why not just replace the gasket while it is off?????????????


All times are GMT. The time now is 06:47 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.