SV650.org - SV650 & Gladius 650 Forum - Which stainless rivets?

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Which stainless rivets? (http://forums.sv650.org/showthread.php?t=133350)

-Ralph-

07-06-09 10:17 AM

Which stainless rivets?

To stubby an aftermarket Fuel can?

The holes are 4mm an the rivet needs to go through 3 sheets of stanless, the exhaust skin, the end cap and the decorative band, so about 3-4mm.

I have a choice of two rivets

4.0mm x 8mm Stainless steel rivets. Head dia - 8.05mm / Head thickness - 1.3mm / drill 4.1mm / Grip range 1.7mm to 3.2mm.

4.0mm x 10mm Stainless steel rivets. Head dia - 8.05mm / Head thickness - 1.3mm / drill 4.1mm / Grip range 3.3mm to 4.8mm.

Thanks

Marcus

07-06-09 11:41 AM

Re: Which stainless rivets?

Used to go shopping for Andy at Zorstec - always bought 4 x 10mm stainless & a decent 4.1 mm drill bit

-Ralph-

08-06-09 07:30 PM

Re: Which stainless rivets?

Thanks Marcus :cool:

All times are GMT. The time now is 02:59 PM.