SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   For Sale - Other Bikes and General biking items (http://forums.sv650.org/forumdisplay.php?f=164)
-   -   Thundercat bits for sale (http://forums.sv650.org/showthread.php?t=136672)

_Stretchie_ 30-07-09 09:05 AM

Thundercat bits for sale
 
Right, I have a load of parts available and wanted to see if any of you guys are interested before they go on Ebay next week

The bike history

R reg, first registered on 01 Aug 1997 and was red, white and dark blue (I personally don't recall seeing one this colour but looks like an original paint job)

Had a low speed spill onto the right side, the fella had it for ages with a plan to fix it but never got around to it. It was bought as a donor vehicle for a 400cc project and when he took all bits he wanted I bought the carcass of him

Parts

Fairings - complete set, tidy but not without some issues

front left - crack at indicator and mounting hole near where your knee would be
front right - gravel rash on the two edges where you can see through to the rad
Nose cone (complete with headlight and air boxes both sides and the inner fairing where the wheel lives) - crack on lower right mounting hole near the air box, gravel rash on the corner to the left of the light if looking at it head on
Rear left - good condition, very small area where the laquer is coming off but not the paint, just where the inside of your knee rubs it
Rear right - Rear left - good condition, very small area where the laquer is coming off but not the paint, just where the inside of your knee rubs it
Rear fairing that sits between grab handles - good condition, is blackthough
Tank - good condition
V piece - good condition
Front hugger (forward facing part) - crack along side the lower right mounting point
Front hugger (part that faces the v piece) - good condition
Standard shape screen, solid black - good condition
Rear light surround - White and good condition

http://i76.photobucket.com/albums/j1...1984Medium.jpg

Other bits

Nose cone sub frame - could benefit from a rub downand a new coat but doesn't need it

http://i76.photobucket.com/albums/j1...1985Medium.jpg

Air box - good condition, has K&N sticker on it but I think is a standard air filter in there right now
Front trim set - clock surrounds and thetrim pieces that attach to it

http://i76.photobucket.com/albums/j1...1986Medium.jpg

Grab handles - good condition
Coil holder - good condition
Frame with V5, although this will take a couple of weeks for the DVLA to send me a new V5 with my details - Good nick, has some minor areas of surface rust, the worse being under the headstock but a simple rub down and treat would see it right

http://i76.photobucket.com/albums/j1...1990Medium.jpg

http://i76.photobucket.com/albums/j1...1992Medium.jpg

Swing arm - good condition, just needs cleaning, has a little bit of rust coming down from the chain adjustment window but I think that might clean up actually and also no rust in the area where the shock lives

http://i76.photobucket.com/albums/j1...1996Medium.jpg

http://i76.photobucket.com/albums/j1...1997Medium.jpg

I've not cleaned any of this up yet but could do, if you would like close ups of any parts or the damage or descriptions written above let me know. There were just too many pics for one thread.
Hope this is of some use to you guys. Will wait a week before putting on e-bay, just thought I'd prefer to offer it out on here first

Cheers

Ter 30-07-09 09:19 AM

Re: Thundercat bits for sale
 
How much for everything bar frame and swingarm?

_Stretchie_ 30-07-09 09:52 AM

Re: Thundercat bits for sale
 
Everything in the first three pics??

Ter 30-07-09 10:08 AM

Re: Thundercat bits for sale
 
yeah,

got a mate with a thundercat track bike that might be interested...

_Stretchie_ 30-07-09 10:24 AM

Re: Thundercat bits for sale
 
Coolio, you going to the AR, I think we should have a beer together

I've also got a box 'o' bits, not had a look in there yet and some of it I want for my Thundercat. Stuff like ignition switch, left handle bar, axles, have brake calipers too. Will get a proper list together of the rest of the stuff but won't be til next week.

And a set of forks but contemplating fitting a Thundercat front end to the CBR400?? Same size wheel, better suspension and brakes. Or I might just sell em and fit progressive springs and new oil to the existing shocks to fund a replacement rear shock for the little 400

Would you like a closer pic of any and all damage to show him to see if he is interested?

Send me a PM with your e-mail address and I'll sort it out tonight after packing up for tomorrow's trip to the AR


All times are GMT. The time now is 10:50 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.