Indicators - work with alarm but not by the switch.
 

Evening all,

does or would anyone know why my SV's indicators will not work using the switch on the handlebars but they work with my arming and disarming the alarm?

Re: Indicators
 

on an sv?

could be a fuse, severered wire, on faulty switch

Re: Indicators
 

well i picked the bike up form a garage today to have some work done (on the alternator rotor) and now they aint working from the switch, but are when i arm the alarm, is there anything i can check in the morning (when its light) to save taking it back to the garage, just havent got the time atm (the garage has said bring it back in tho so it cant be anything major surely??) like a plug maybe or fuse..

Re: Indicators
 

fuse is pretty easy to check, on the sv the fusebox is under your seat

Re: Indicators - work with alarm but not by the switch.
 

Do you happen to know which fuse the indicators are? also if it is not that, then what do i check for? a plug or ....??

Re: Indicators - work with alarm but not by the switch.
 

Check all your fuses, there may well be one marked 'signal', assuming its an sv.
Fuse seems most likely to me, bearing in mind all 4 of the indis aren't working I can't think of any plug connector they all go through, there's possibly a wire that could have been corroded. maybe it the switch.
Start with the fuse

Re: Indicators - work with alarm but not by the switch.
 

cool cheers dave, im about to check it now, fingers crossed

Re: Indicators - work with alarm but not by the switch.
 

It occurs that if they all flash from the alarm, then the bulbs must be fine, the wiring to earth should be and the fuse may be too. I don't know if the output from the alarm goes in before or after the fuse, but the common point may be the indicator switch and wiring, as the system works, just not via the normal switch.

Checking the fuse would defiantly be worth a go though.

Jambo

Re: Indicators - work with alarm but not by the switch.
 

right well it wasnt the fuse, they are all fine, the hazard switch on the r/h side of the handle bars isnt working the indicators either :S any ideas now? (its an sv1000s btw)

Re: Indicators - work with alarm but not by the switch.
 

I believe the alarm uses it's own fuse to flash the indis, I had the same symptoms and it was just the fuse.


Asteer, might be worth checking your wiring or the switchgear - but unless it's a big pain in the **** I'd just take it back to the garage to do.
Unless anyone can think of any connections they might have just left unplugged :scratch: