gsxr front end! Again
 

I know this question has already been asked but i want to get the experiences and as many close up pics of sv's with gixer front ends and also rear shocks. Sorry if this has been asked before but it's the pics i am after. Looking to change the front end and rear shock next year now as i have to pay for the paint and new bits i have discovered need changing while re-building!

Thanks Guys

Re: gsxr front end! Again
 

http://i205.photobucket.com/albums/b...8_03250001.jpg
http://i205.photobucket.com/albums/b...8_03250002.jpg

Re: gsxr front end! Again
 

Kinell yc!! that downpipe is scarely clean for you(expected it to be full of carp).......me thinks under all that bravado you may have a little cleaning fetish going on;)

Re: gsxr front end! Again
 

Lol dizzyblonde cleaned it for me that day. My bike is actually quite trick under all the grime :-P

Re: gsxr front end! Again
 

K4 GSXR 600 on a K5. Rear shock is either off the same bike (K4 600) for the track or a 750 SRAD on the road. Both go straight in with only minor mods to the undertray.

http://i246.photobucket.com/albums/g...h08fronton.jpg

Re: gsxr front end! Again
 

Re: gsxr front end! Again
 

like that, what mods did you need to do for front end???

Re: gsxr front end! Again
 

Any will go in you just need different speedo and top bearing (you don't on a pointy).

To fit any SRAD or newer stuff to curvy you need to buy a top bearing conversion from Zoran at twin works factory. It is easy mod. Then everything bolts on as if it was meant to be.

P.S if SV race shop still sell their copy of that bearing, don't buy it there.

Re: gsxr front end! Again
 

so if i was to do this to my pointy it will bolt straight on and i will still be able to use my OEM speedo?

Re: gsxr front end! Again
 

Speedo yes, not speedo drive. You will need to add some magnets in disc and a sensor.