sv2005s soft front end?
 

I have just sold my 2001 sv650s 20k and replaced it with a 2005 sv650s 7k

The front end seems to bang when i hit minor pot holes where as my 2001 model seemed to pass over the same bumps fine?

I have sat on the bike and rocked it forward and back to see if i can replicate the noise but all seems fine? No bang ect....

Re: sv2005s soft front end?
 

My K3 does that, sounds like knackered head bearings, apparantly they all do it.;););)

Re: sv2005s soft front end?
 

Hydraulic lock.

Re: sv2005s soft front end?
 

It's unlikely to be either of those above *. I'd suggest it's just the standard weak springs the SV comes fitted with, in all probabillity your previous SV had had the "oil & Spring" change already and your new one requires it.



*always possible of course, but SV's are know for there under sprung front ends as standard.
Cheers Mark.

Re: sv2005s soft front end?
 

It's the fork oil in the damper rods, but it really does sound like clunky bearings.;)

Re: sv2005s soft front end?
 

just turn up ur preload and it wont clunk!!..

Re: sv2005s soft front end?
 

Is the clunking actually detrimental to handling?

Re: sv2005s soft front end?
 

My '09 "clunked" from new with its 90kg rider. The rapid motion of the under sprung front would have contributed to hydraulic lock.
Springs will certainly help.

Cheers

Re: sv2005s soft front end?
 

Yes. The clunk is caused by a lack of compliance in the suspension which may briefly overload the tyre and cause fork flex and vibration. It will generally unsettle the bike, lowering its limits on uneven surfaces. In the same way it also lowers braking limits as the front chatters, skips and skids. You may not always hear it clunking but the same mechanisms are at work.


Cheers

Re: sv2005s soft front end?
 

So what's the remedy? different forks? I've got harder springs in mine and it feels ok (much better than standard) and it isn't bottoming out but I still get the clunk every now and then.