SV650.org - SV650 & Gladius 650 Forum
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   AKRAPOVIC baffle removal? (http://forums.sv650.org/showthread.php?t=143421)

SUPERSTARDJ01 01-12-09 12:07 PM
AKRAPOVIC baffle removal?
 
Anyone know how to remove the baffle from one of these?

Sally 01-12-09 12:24 PM
Re: AKRAPOVIC baffle removal?
 
Is it held in with a cir-clip?
Or a bolt under the outlet?
Or does it just pull out..?

Have a look for the things above until someone who has one can tell you!
Take a picture too, that will help :)

SUPERSTARDJ01 01-12-09 12:26 PM
Re: AKRAPOVIC baffle removal?
 
Ive looked and felt, and it's all smooth, it's a full system.

Sally 01-12-09 01:02 PM
Re: AKRAPOVIC baffle removal?
 
Mmm well wait and hear from someone who has one and knows what they are talking about :)

Sorry!

muffles 01-12-09 08:22 PM
Re: AKRAPOVIC baffle removal?
 
What end can style? Old style has a bolt. If it's the hex style it might be like my Yoshi and have a rubber plug on the side facing the bike, if you remove the plug you can access a hex screw that holds the baffle in.

rigor 01-12-09 08:35 PM
Re: AKRAPOVIC baffle removal?
 
It may not have a baffle in...

If the exhaust outlet is the full diameter of the "outside" of the exhaust then there is no baffle. If it's smaller then there is a baffle.

Pic of exhaust WITH baffle
http://www.sportsbikeshop.co.uk/prod...rapovic_sp.jpg

The baffle is the bit in the middle. There will be a bolt underneath the outlet, undo the bolt, get a pair of pliers and put the middle bit out. You may want to use a bit of cloth to stop damaging the baffle.

Post a pic of the end of the exhaust and it's easy for someone to tell you if there is one or not.

beabert 01-12-09 10:41 PM
Re: AKRAPOVIC baffle removal?
 
I used a broom handle to whack it out from inside when a friend first got his lol, well tight. Think we sanded it after so it was less snug (fuel can)

SUPERSTARDJ01 02-12-09 10:24 AM
Re: AKRAPOVIC baffle removal?
 
Quote:
Originally Posted by rigor (Post 2112413)
It may not have a baffle in...

If the exhaust outlet is the full diameter of the "outside" of the exhaust then there is no baffle. If it's smaller then there is a baffle.

Pic of exhaust WITH baffle
http://www.sportsbikeshop.co.uk/prod...rapovic_sp.jpg

The baffle is the bit in the middle. There will be a bolt underneath the outlet, undo the bolt, get a pair of pliers and put the middle bit out. You may want to use a bit of cloth to stop damaging the baffle.

Post a pic of the end of the exhaust and it's easy for someone to tell you if there is one or not.
I think it doesn't have a baffle then, because there is no centre piece.

Mej 02-12-09 10:43 AM
Re: AKRAPOVIC baffle removal?
 
thats exactly what mine looks like on the scorpion can, big piece in the middle which just come out after you loosen the bolt

SUPERSTARDJ01 02-12-09 11:27 AM
Re: AKRAPOVIC baffle removal?
 
Called the place I purchased the bike from to see if they have the baffle which they do not but they said when it needs an MOT take it back and they will pass it as it is. Happy days.


All times are GMT. The time now is 12:47 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.