SV650.org - SV650 & Gladius 650 Forum
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Replacing the Cadburys float bowl screws. (http://forums.sv650.org/showthread.php?t=146739)

Taipan 16-02-10 01:19 PM
Replacing the Cadburys float bowl screws.
 
Would these be the right allen bolts?

http://cgi.ebay.co.uk/M5-x-10-Stainl...item563249a336

yorkie_chris 16-02-10 01:28 PM
Re: Replacing the Cadburys float bowl screws..
 
Measure the ones that came out. I think I used M5x15 but could be wrong. Measure them.

Taipan 16-02-10 01:32 PM
Re: Replacing the Cadburys float bowl screws..
 
Quote:
Originally Posted by yorkie_chris (Post 2183885)
Measure the ones that came out. I think I used M5x15 but could be wrong. Measure them.
I ideally wanted them on hand to replace once I had the carbs out rather than then order them up IYSWIM? I'm long overdue a visit to the local fastners. Perhaps its time to go and get a fresh selection of stainless goodies.

yorkie_chris 16-02-10 01:33 PM
Re: Replacing the Cadburys float bowl screws..
 
ok I'll go measure some for you

Taipan 16-02-10 01:37 PM
Re: Replacing the Cadburys float bowl screws..
 
Quote:
Originally Posted by yorkie_chris (Post 2183895)
ok I'll go measure some for you
Top man!:cool:

yorkie_chris 16-02-10 01:39 PM
Re: Replacing the Cadburys float bowl screws..
 
so long as you're not in a rush :-P

Taipan 16-02-10 01:44 PM
Re: Replacing the Cadburys float bowl screws..
 
Quote:
Originally Posted by yorkie_chris (Post 2183903)
so long as you're not in a rush :-P
No mate not really. Thinking about it, I'm round my in-laws tomorrow nighty and my spare carbs are round there. So if yours aren't to hand and no one knows I can find out then anyway.:)

Taipan 17-02-10 07:41 PM
Re: Replacing the Cadburys float bowl screws.
 
For the benefit of the archives, M5 x 10mm.

yorkie_chris 17-02-10 07:45 PM
Re: Replacing the Cadburys float bowl screws.
 
Beat me to it, I'd even dug a set of carbs out of the spares pile :-P

Taipan 17-02-10 08:14 PM
Re: Replacing the Cadburys float bowl screws.
 
Quote:
Originally Posted by yorkie_chris (Post 2185627)
Beat me to it, I'd even dug a set of carbs out of the spares pile :-P
Its appreciated anyway. :)


All times are GMT. The time now is 03:05 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.