![]() |
Airbox refitting tips
As the bike is nearly back in one piece, are there any tips in refitting the airbox on a curvey.
I removed it to get to the ingnition connector in front of the airbox |
Re: Airbox refitting tips
Leave the boots on the carbs and just pop it down onto the lips. Get rear one aligned then push it back a little, then push down and it pops on. Then just reach inside and make sure the lip is rolled over the right way all around both carb inlets.
|
Re: Airbox refitting tips
Do you use any lube, vasaline or red rubber grease to ease the refitting
|
Re: Airbox refitting tips
Nah there's usually bit of oil on them from the airbox anyway.
If they're very cold it can be a pain. |
Re: Airbox refitting tips
Quote:
|
Re: Airbox refitting tips
They should be ok though, just flexing them around warms them up. Give it a go it's not massively hard.
|
Re: Airbox refitting tips
Yep, its the first time I've taken the airbox off. Its one of those things there's a knack to doing it. Cheers YC
|
Re: Airbox refitting tips
Hmmm, I always do it with the boots on the airbox and reach inside to push them over the carbs.
Hot air gun or some other kind of heat works wonders though. Druid |
Re: Airbox refitting tips
That works too, just then you have to mess with the screws with less access. Many ways to skin a cat.
|
Re: Airbox refitting tips
Long screwdriver and making sure the screws have plenty of copperslip. :)
Druid |
All times are GMT. The time now is 05:12 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.