SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Screen replacement on K3 (http://forums.sv650.org/showthread.php?t=149533)

SVFreak 07-04-10 03:59 PM

Screen replacement on K3
 
Planning on purchasing an iridium screen for my K3.
Is it just a case of removing the five bolts that hold the screen in ? And mirrors.
Or will i need to remove any of the trim around the clocks ?
Also when i undo the five bolts will anything fall off the back off them (i:e nuts etc) ?

rowdy 07-04-10 06:08 PM

Re: Screen replacement on K3
 
Quote:

Originally Posted by SVFreak (Post 2236438)
Planning on purchasing an iridium screen for my K3.
Is it just a case of removing the five bolts that hold the screen in ? And mirrors.
Or will i need to remove any of the trim around the clocks ?
Also when i undo the five bolts will anything fall off the back off them (i:e nuts etc) ?

No need to remove mirrors, but you will probably have to remove the clock surround panel, it's only held in by a couple of screws. There are some little rubber grommets that are between the fairing panel and screen that the screen bolts go through, be careful they will probably drop out.

What screen are you getting?
I bought an airblade screen and had to trim some of the plastic on the clock surround panel where the top screws holds the screen in place for the clock surround panel to fit flush against the screen/fairing.


All times are GMT. The time now is 08:58 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.